BLOG Hop Project Sheet

Card Carrier:
1. Stamp vertical snowman onto 2 ¾" x 3" white panel.
2. Adhere white panel to 3" x 3 1/4" Festive panel.
3. Flock snowman's scarf with stripes by applying glue in striped pattern. Coat with one color of
     flock at a time. Rub into glue and brush off excess. Repeat for other colored stripes.
4. Apply glue and flock, one color at a time, to remaining areas to be flocked. Brush off excess.
5. Embellish with Super Stars Class A'Peel Stickers and set aside.
6. Score 5" x 11" Blue cardstock at 5 1/8" from each short end. Round all 4 corners and use a small scalloped
oval punch to punch a hole in the center of each short end, as far in as the punch will go.
7. Score 7 ½" x 3 ½" Blue cardstock at ½" and 1 ¼" from both short sides and at 1/2" from one long edge. 
The long edge with no score is the top of this panel. Stamp panel with snowflakes and greeting with white ink, centered on panel. Fold towards back along score lines.
8. Place large panel vertically on surface, right side up, and stamp snowflakes using white ink on bottom portion.
9. Flip panel right to left and stamp snowflakes and other greeting with white ink on bottom half of large panel. (this should be directly on the back of the snowflake stamped section)
10. Flip large panel top to bottom, so snowflake side is at top. Adhere Festive snowman panel to snowflake stamped panel, just above upper score line to the left of center.
11. Fold panel back along both score lines and re-open flat so greeting side is face up.
12. Fold small Blue panel along score lines. Apply glue to outside edges of  ½" fold.  Attached glued folds to large panel just above upper score line.
13. Let glue dry. Add cards to carrier and secure with ribbon by tying through oval holes.

Card 1:
1. Stamp horizontal snowman and greeting onto 3 ¾" x 2 ¾" white panel using Onyx Black ink.
2. Remove backing from 4 5/8" x 3 ¼" Peel N Stick. Adhere to center of folded 4 7/8" x 7" Festive card.
3. Remove protective cover from Peel N Stick and place snowman panel on adhesive. Press in place. Apply Super Stars directly to adhesive panel around and overlapping snowman panel.
4. Coat remaining exposed Peel N Stick with blue flock. Rub into adhesive. Dust off excess flock.
5. Flock snowman's scarf with stripes by applying glue in striped pattern. Coat with one color of
     flock at a time. Press into glue and brush off excess. Repeat for other colored stripes.
6. Apply glue and flock, one color at a time, to remaining areas to be flocked. Brush off excess.

Card 2:
1. Stamp horizontal snowman and greeting onto 3 ¾" x 2 ¾" white panel using Onyx Black ink.
2. Stamp snowflakes repeatedly using white ink on front of folded blue 4 7/8" x 7" panel.
3. Adhere white panel to blue card front.
4. Flock snowman's hat and scarf with stripes by applying glue in striped pattern for blue flock.
     Coat with blue flock and rub into glue. Brush off excess.
5. Repeat step 4 for green stripes, pink cheeks, orange nose, and white hat accents.
6. Embellish with Super Stars.

Card 3:
1. Stamp vertical snowman onto 2 ¾" x 3" white panel, and greeting onto bottom of  folded
     4 7/8" x 7" white panel, turned vertically, using Onyx Black ink.
2. Remove backing from 3 ¼" x 3 ¾" Peel N Stick. Adhere to card front, centered.
3. Remove protective cover from Peel N Stick and place snowman panel in center. Press in place.
4. Coat exposed Peel N Stick with green flock. Rub into adhesive. Dust off excess flock.
5. Flock snowman's scarf with stripes by applying glue in striped pattern. Coat with one color of
     flock at a time. Rub into glue and brush off excess. Repeat for other colored stripes.
6. Apply glue and flock, one color at a time, to remaining areas to be flocked. Brush off excess.
7. Embellish with Super Stars.
Paper Sizes:
Blue - 1 panel 11" X 5"; 1 panel 7 1/2" X 3 1/2"; 1 panel 4 7/8" X 7" folded in half
Festive - 1 panel 3" X 3 1/4"; 1 panel 4 7/8" X 7" folded in half
White - 2  panels 2 3/4" X 3"; 2 panels 3 3/4" X 2 3/4"; 1 panel 4 7/8" X 7" folded in half

You can download a project sheet for this project HERE