Vintage Couple by Tenia Nelson

Supplies:Q204_SSC1209_DWLX7026_TN

Stampendous:
Q204 Vintage Couple Rubber Stamp
SSC1209 Holiday Words Perfectly Clear™ Stamps Set
MEM01 Tuxedo Black Ink by Tsukineko®
MPW811 Mixed Media White Paper
SSH34 Medium Acrylic Perfectly Clear™ Stamp Handle

Dreamweaver Stencils:
DWLX7026 Chevron Background Stencil

Plus:
Cardstock by Core’dinations®
Red ink
Zip-Dry™ Paper Glue by Beacon Adhesives
3D-Foam squares by Scrapbook Adhesives by 3L®
Circle die or punch
Corner punch
Washi Tape
Sponge
Sequins

Instructions:

  1. Fold a 5 1/2 x 8 1/2 inch kraft cardstock in half to a finished 4 1/4 x 5 1/2 inch side folding card base.
  2. Lay stencil onto front of card base and sponge red ink through stencil.
  3. Corner round top corner of card base.
  4. Stamp Vintage Couple with black ink onto color cardstock and cut out with circle die or punch. Adhere to card base with foam squares.
  5. Stamp Holiday Words onto Mixed Media White Paper with black ink and trim down with scissors. Adhere to card base with foam squares.
  6. Glue sequins onto card base.
  7. Add washi tape to card base.

Marks Canvas by NK Studios

Supplies:MarkMakerCanvas_NathalieKalbach01_01_800

From Stampendous:
NKCRS06 Cling Marks Set
FREG043 Aged Green Embossing Enamel
FREG024 Aged Gold Embossing Enamel
VM001 Versamark Watermark Ink by Tsukineko

Plus:
Canvas
Soft Body Acrylics by Liquitex®
Matte Gel Medium by Liquitex®
Nails and zinc washers
Paintbrushes
Zip Dry™ Paper Glue by Beacon Adhesives
Hammer

Instructions:

  1. For texture use Marks stamps with Versamark Watermark ink onto canvas and heat emboss with Aged Embossing Enamels.
  2. Paint base color on canvas.
  3. Splatter thinned paint around canvas and let dry or use heat tool.
  4. Use a makeup sponge to load paint onto Marks stamps and stamp onto canvas.
  5. Sprinkle Aged Gold embossing enamel in a circle on canvas and heat set from the back side.
  6. Paint red circle over glass bead medium adding more if desired.
  7. Hammer a row of nail with a washer across bottom of canvas.
  8. Ink nail and washers with Versamark Watermark ink and emboss with Aged Embossing Enamel.

Watch Nathalie creating with n*Studio Stamps here —

Tiered Dress by Amy Hurley-Purdie

Supplies:P255_SSC1214_AHP_800

From Stampendous:

P255 Tiered Dress
SSC1214 Happy Greetings Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:

  • Cardstock – teal, white
  • Patterned paper – Teal graph, swirl, chevron
  • Memory Box frostyville border Cutting Die
  • Copic markers: B000, B00, B01
  • Memento Ink – black
  • Glossy accents
  • Zip Dry
  • Foam Tape
  • Transparency sheet

Instructions:

  1. Place transparency sheet in front of you. Use glossy accents to create a 5” x 1” border. Making sure to draw a straight line for top of the border and a wavy line for the bottom of the border. Fill in completely with glossy accents and sprinkle with Crystal Micro Glitter. Let dry for several hours.
  2. Start with 5 1/2” x 5 1/2” teal card. Glue 5 ¼” x 5 ¼” white card stock centered. Glue 5” x 5” teal swirl patterned paper centered. Cut 2 ¾” x 5” strip from white card stock and matt on to teal card stock leaving ¼” border on the left and right side. Glue vertically on card as shown. Cut 5” x 1 ¼” teal chevron patterned paper and stamp sentiment in the lower right corner. Glue centered and ¼” from the bottom.
  3. Using frostyville border Cutting Die, cut snowflake border from white card stock. Glue above chevron paper as shown. Glue a few small snowflakes to top left and top right corners.
  4. Cut a 3” x 5” oval from white card stock, and apply sticky panel. Trim excess. Sprinkle with Crystal Micro Glitter. Tap off excess. Glue centered to card front.
  5. Stamp Tiered Dress onto white card stock and color with Copic markers as shown. Stamp hanger only onto oval. Cut layers of dress and foam tape each layer to oval.
  6. Carefully peel glitter border from transparency. Glue onto chevron border with zip dry as shown. Add lines and dots to dress with Glossy Accents and sprinkle with Micro Glitter.

Spotted Feather by Amy Hurley-Purdie

SuppliesM322_AHP_800

From Stampendous:
M322 Spotted Feather
EP111 Midnight Black Embossing Powder
DP102 Detail Gold Embossing Powder
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:

  • Cardstock by Bazzill Basics® – light gray, white, black
  • VersaMark Ink
  • Distress Ink – Weathered wood
  • Heating tool
  • Zip Dry™ Paper Glue by Beacon Adhesives
  • Foam Tape

Instructions:

  1. Start with 5 1/2” x 6 1/4” light gray card. Using Weathered Wood distress ink stamp spotted feather randomly onto card front. Glue 3 ¾” x 5” black card stock centered onto card.
  2. Cut 3 ¾” x 5” white card stock. Tear all four sides. Using VersaMark ink pad, swipe center of card stock and sprinkle with black embossing powder. Shake off excess and heat set.
  3. Apply heavy coat of VersaMark ink to feather stamp, set aside. (This will help the stamp release after it is pushed down into heated embossing powder.) Pour a generous mound of gold embossing powder on top of black embossing powder. Heat set from underneath. Once powder is almost completely melted then heat set from the top. Working quickly, press spotted feather stamp into gold embossing powder and with even pressure hold in place for 10 seconds. Gently pull stamp out. Foam tape centered onto black card stock as shown

Flamingo by Amy Hurley-Purdie

Supplies:P250_L260_AHP_800

From Stampendous:
P250 Flamingo
L260 Relax Enjoy
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:

  • Cardstock by Bazzill Basics® – coral, white, tan
  • MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
  • SSH57 Jumbo Perfectly Clear™ Acrylic Handle
  • Patterned paper – coral gingham, multi polka dot, green dot
  • Copic markers: C2, C3, C5, 0, Y15, YG57, YG63, G82, B00, B12, B93, B95, B97, YR02, R20, R32, RV14, Y35, Y43
  • Lifestyle Scalloped Oval Cutting Dies
  • Lifestyle Oval Cutting Dies
  • Scalloped Border Cutting Die
  • White Flowers
  • Sequins – white, coral, clear
  • Rhinestones – clear
  • Zip Dry™ Paper Glue by Beacon Adhesives
  • Foam Tape

 

Instructions:

  1. Start with 5” x 7” white card. Glue 5” x 6 ¼” coral card stock flush with the top. Glue 4 ¾” x 6” multi dot centered on coral paper. Cut 3 ½” x 4 ¾” green dot and matt onto tan card stock leaving ¼” border. Glue 3/8” from the right and ¾” from the top.
  2. Die cut 3 ¼” x 5 ¼” oval from white card stock. Stamp flamingo and color with Copics as shown. Glue onto 3 ¾” x 5 ¾” coral gingham scalloped oval. Glue to card front as shown. Cut 5” x 7/8” coral gingham and die cut with scalloped border. Glue to bottom of card.
  3. Cut 2 ¾” x 1 ½” tan card stock. Stamp with sentiment. Cut a “V” from one side and glue to bottom right side of card. Apply flowers and sequins as shown.