Archive for Lea Kimmel – Page 2

Tiered Dress by Lea Kimmel

Supplies:P255_L261_LK_800

From Stampendous:
P255 Tiered Dress
L261 Penned Celebrate
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
FRC19 Amethyst Frantage Color Fragments
FRC01 Powder Blue Frantage Color Fragments
MC06 Lavender Micro Glitter

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Neenah® Classic Crest™ Solar White Cover Stock
Tim Holt® Distress Ink in Shabby Shutters
Memory Box® Viola 6×6 Paper Collection
Copic® Markers:  BV01, BV02, BV04, BV08

Instructions:

  1. Stamp dress and color
  2. Trim image to desired size and edge with distress ink
  3. Stamp sentiment, trim and ink with distress ink
  4. Create vertical A2 card base with a tent fold and a mat for all images from lavender paper
  5. Adhere all layers as shown, using foam squares to mount sentiment
  6. Adhere glitter to front of dress
  7. Mix fragments and adhere as shown

Swan Pair by Lea Kimmel

Supplies:P254_SSC1199_LK_800

From Stampendous:
P251 Swan Pair
SSC1199 Loving Messages Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
EP226 Champagne PEARLustre Embossing Powder
VM001 VersaMark Watermark Ink Pad

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Neenah® Classic Crest™ Solar White Cover Stock
Creative Imaginations© Song Birds Patterned Paper
3D Foam Squares by Scrapbook Adhesives®
Copic® Markers:  B0000, B12, B14, B16, Y35, Y38, YR18

Instructions:

  1. Stamp image and color with markers
  2. Trim image to fit as shown
  3. Using blue cs, create a horizontal A2 card base with a tent fold
  4. Create a mat for the main image from the same cs
  5. Trim patterned paper as shown
  6. Stamp accents with VersaMark, add embossing powder, tap off excess and heat emboss on patterned paper
  7. Stamp sentiment with VersaMark, add EP and heat emboss on a small piece of patterned paper
  8. Trim sentiment as shown and cut a mat from blue cs
  9. Adhere card layers as shown, attach sentiment with foam squares

Single Adirondack by Lea Kimmel

Supplies:Q210_L260_LK_800

From Stampendous:
Q210 Single Adirondack
L260 Relax Enjoy
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
FRM11 Teal Frantage Mica Fragments
FRC20 Hot Lime Frantage Color Fragments
FRC01 Powder Blue Frantage Color Fragments

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
My Mind’s Eye Fine and Dandy 6×6 Designer Paper Pad
My Mind’s Eye Quite Contary 6×6 Designer Paper Pad
Neenah Classic Crest Solar White Cover Stock
Copic Markers:  BG000, BG01, BG02, BG05, YG11, YG13, YG17, N2, Y00, Y06, Y13, Y38, E40, E41, E42, C1, B0000, YG93, YG95

Instructions:

  1. Stamp image and color, trim image into a square
  2. Create a 5″ square card base with a tent fold from teal cardstock
  3. Trim a piece of white cs into a 4.75″ square, adhere to card base
  4. Using two different dot pattern papers, trim four squares, two from each paper into 2.25″ squares, adhere to card base as shown
  5. Stamp sentiment and trim close to edges
  6. Create a mat for the sentiment from teal cs and layer the two pieces
  7.  Attach sentiment with foam squares
  8. Mix fragments and adhere to lower left corner of image as shown

Penned Friend by Lea Kimmel

Supplies:Q211_H315_LK_800

From Stampendous:
Q211 PenPattern Petal
H315 Penned Friend
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
FRM11 Teal Frantage Mica Fragments
FRC20 Hot Lime Frantage Color Fragments
FRC01 Powder Blue Frantage Color Fragments

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Memento™ Bahama Blue Ink by Tsukineko®
Radiant Neon™ Electric Blue Pigment Ink Refill by Tsukineko®
Radiant Neon™ Electric Green Pigment Ink Refill by Tsukineko®
Radiant Neon™ Electric Yellow Pigment Ink Refill by Tsukineko®
Radiant Neon™ Electric Blue Pigment Ink Pad by Tsukineko®
Liquitex® Airbrush Medium
Hug Snug® Seam Binding
Neenah® Classic Crest™ Solar White Cover Stock
3D Foam Mounting Squares by Scrapbook Adhesives®

Instructions:

  1. Create three spray mists using ink refills, mixing each with a small amount of airbrush medium
  2. Trim a piece of white cs to fit an A2 card base and spray with inks
  3. Using yellow spray mist, remove sprayer and drip ink onto paper, dry with heat gun
  4. Stamp flowers onto dried paper with Electric Blue ink
  5. Trim another piece of cs large enough for the sentiment, spray with misters and drip ink, dry as with the background piece
  6. Stamp sentiment with Bahama Blue ink and trim to desired size
  7. Create an A2 vertical card base and a mat for the sentiment from yellow cs
  8. Trim a piece of seam binding and spray it with misters, heat to dry
  9. Create a double bow from seam binding and attach to stamped background
  10. Adhere background piece to card base
  11. Attach matted sentiment to card with foam squares
  12. Mix green and blue color fragments with teal mica fragments
  13. Add bits of glue randomly around card, apply fragment mix, tap off excess

PenPattern Flutter by Lea Kimmel

Supplies:

From Stampendous:
Q212 PenQ212_H312_LK_800Pattern Flutter
H312 Penned Thank You
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
EP040 Stardust Sparkly Embossing Powder
VP001 VersaMarker Watermark Ink Pen

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Queen & Co.® Rhinestones
Neenah® Classic Crest™ Solar White Cover Stock
3D Foam Squares by Scrapbook Adhesives®
Copic® Markers: BV01, BV02, BV04; V12, V15, V17; R24, R27, R29; YR12, YR15, YR16; Y02, Y06, Y08; YG11, YG13, YG17; G000, G00, G02, G21, G24, G28; B01, B02, B05; BG13, BG15, BG18, BG72, BG75, BG78; B21, B24, B26

Instructions:

  1. Stamp butterfly image three times in a vertical pattern being sure to overlap the butterflies
  2. Color butterflies and trim image to fit on an A2 card base
  3. Using VersaMarker, add ink to movement lines, bodies and antenna of each butterfly, sprinkle on embossing powder, tap off excess and heat
  4. Create A2 card base with a tent fold and adhere image
  5. Stamp sentiment with black ink and trim
  6. Create a mat for sentiment and adhere the two together
  7. Attach sentiment to card with foam squares
  8. Attach rhinestones to sentiment