Archive for Design Team – Page 2

HappyHoppers® Cool It by Fran Seiford

Supplies:HHV02_SSC007_FS_800

From Stampendous:
HHV02 Cool It
SSC007 Storybook Alphabet Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH34 Perfectly Clear™ Acrylic Handle
MPW811 Mixed Media White Paper

Plus:
Cardstock by Bazzill Basics®
Memento™ Bahama Blue Ink by Tsukineko®
Colored Pencils
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Fold a 5 1/2 x 8 1/2 inch cardstock in half for a card base with a folded size of 5 1/2 x 4 1/4 inches.
  2. Create white background paper with words made from the Storybook Alphabet inked with Memento Bahama Blue ink.
  3. Adhere background paper to colored mat and glue onto card base.
  4. Stamp Cool It image with Memento Tuxedo Black ink onto Mixed Media White Paper and color with colored pencils.
  5. Adhere to colored mat and glue onto card base at an angle.

Bird Gears by Fran Seiford

Supplies:R222_FS_800

From Stampendous:
R222 Bird Gears
EJS05 Spoonful of Rust Embossing Plus Kit
Memento™ Tuxedo Black ink pad by Tsukineko®
SSH46 Large Acrylic Stamp Handle

Plus:
Cardstock by Bazzill Basics®
Colored Pencils
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Fold a 5 1/2 x 8 1/2 inch cardstock in half for a card base with a folded size of 5 1/2 x 4 1/4 inches.
  2. Stamp Bird Gears with black ink on colored cardstock and color with colored pencils.
  3. Sprinkle Spoonful of Rust around image and heat set from the back of the cardstock.
  4. Glue onto different color cardstock mat and then onto card base.

Frantage Flowers Poppy Pop Up Die Necklace by Debbie Cole

Supplies:DCP1001_SSC1198_DC_800

From Stampendous:
SSC1198 Frantage Flowers Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
FRG02C Champagne Crushed Glass Glitter
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Deep Burgundy, Desert Sand, Lamp Black, Spicy Mustard Acrylic Paint by DecoArt®
Dazzling Metallics Bronze Acrylic Paint by DecoArt®
Matte Medium by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Watch Parts
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the two largest rectangle dies, tape together, and cut eight “frames” to create the bezel using a Big Shot or similar machine. Glue the frames together to create the depth of the bezel. Basecoat with Bronze.
  2. Cut two large backs for the bezels using craft board or heavy mixed media paper. Glue an eye hook or bail to the top of one of the cuts, then glue the two piece together. Base the back side with Bronze. Do not glue the base to the frame until the first layer of the artwork is completed.
  3. The inside artwork is completed with the layered technique. Cut a piece of media paper using the large die. Base with Deep Burgundy.
  4. Stamp the large flower stamp multiple times over the whitepaper. Place the stamp from the kit and place it onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the white mixed media paper. The details should be easily seen and not be too dark. Float to shade the flowers that will be on the top layer with Desert Sand Pull lines of Golden Sand + Spicy Mustard(1:1) in the center of the flowers. Cut all flowers with matte medium to seal.
  5. Stamp the base of the die twice with the scroll from the set using Spicy Mustard. Glue to top of base and coat with matte medium. Cut out and glue the first set of flowers on top of the base and trim. Glue the frame into position and allow to completely dry. Mix the resin following the manufacturer’s instructions and pour just enough to coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Cut the shaded flowers to the resin and allow to dry. Allow to completely dry. Mix the resin following the manufacturer’s instructions and pour to fill the bezel. Allow to harden overnight. Add charms, beads, and chain of choice using jump rings.

 

Tiered Dress by Kristine Reynolds

Supplies:P255_L261_KR_800

From Stampendous:
P255 Tiered Dress
L261 Penned Celebrate
MPW811 Fran’s Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
GX22ou Multi Ultra Fine Glitter
EP200 Stamp and Bond
VM001 VersaMark Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Recollections® Patterned Paper
Copic Markers R20-R21-R22-R24-R29
Really Reasonable Ribbon
Spellbinders oval dies
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Create a side step card out of black cardstock
  2. Adhere patterned paper panels to the card
  3. Stamp dress on white cardstock with black ink and color with markers
  4. Cover dress with VersaMark ink and then with Stamp and Bond
  5. Heat until melted and then cover with glitter
  6. Cut out dress and adhere to card
  7. Stamp sentiment on a white die cut oval panel with black ink
  8. Back sentiment panel with a red scallop edge oval panel and then adhere to card
  9. Tie ribbon around card

House-Mouse® Painting Pals by Wendy Price

Supplies:

HMR22_DCP1001_WP_800

From Stampendous:
HMR22 Painting Pals
W132 Classic Frame
SSC1203 Royal Heart Quotes Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Ribbon by May Arts
Spectrum Noir Markers (EB1, EB2, EB4, EB6, BG1, BG2, BG3, IG2, IG3, PP1, CG2, BG2, PL3, PL4)
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Cut cardstock to 12 x 5.5 inches. Fold card in half horizontally to create a card base.
  2. Stamp image, color and mat.
  3. Adhere stamped image to card. Embellish with bow.