Winter Delivery by Lea Kimmel

Supplies:

From Stampendous:
W136 Winter Delivery
FREG05C Lavender Crushed Glass Glitter
FREG043 Aged Green Embossing Enamel
EI101 Boss Gloss™ Embossing Ink

Plus:
Bright Palette Dual Brush Pens by Tombow®
Jewel Palette Dual Brush Pens by Tombow®
Onyx Black Archival Ink™ by Ranger®
Tim Holtz® Antique Linen Distress Ink by Ranger®
Light Mauve Cardstock by Bazzill Basics Paper™
Classic Crest™ Solar White Cover Stock by Neenah®
Mitten Weather™ 6×6 Mini Deck by Cosmo Cricket™
Ric Rac ribbon by May Arts Ribbon®
Tim Holtz® Paper Distress Tool by Ranger®
Zip Dry™ Paper Glue by Beacon® Adhesives
3D Foam Squares by Scrapbook Adhesives® by 3L

Instructions:

  1. Stamp image with black ink.
  2. Using an acrylic block as a palette, color brush pen onto block and mix colors as needed.
  3. Apply ink from block using blender pen including in the brush pen set. Applying color in this way gives a nice soft watercolor effect.
  4. Once coloring is complete, cut out image using die.
  5. Create 5″x 5″ card base with a tent fold starting with a 5 1/2 x 11 inch cardstock.
  6. Trim your patterned papers as shown.
  7. Use the paper distress tool on the edges of your image and both patterned papers.
  8. Add distress ink to the edges you’ve just distressed.
  9. Adhere the two patterned papers together.
  10. Trim a piece of ric rac to fit across and around to back side of layered patterned papers and adhere.
  11. Adhere layered papers and with ribbon to card base.
  12. Using foam squares, attach image to card.
  13. Add Boss Gloss™ in a few spots around edges, add embossing enamel and heat to melt.
  14. Add glue where desired and sprinkle on glitter, set aside to dry.

House-Mouse® Fall Float by Debi Hammons

Supplies:HMM01_CRS5052_V284_DH_800

From Stampendous:

HMM01 Fall Float Stamp
CRS5052 Jumbo Fall Leaves
V284 Thankful Today
FX71 Sticky Panels
MG01 Crystal Micro Glitter
MG17 Cinnamon Micro Glitter
SSH57 Jumbo Perfectly Clear Handle
VersaFine™ Onyx Black ink by Tsukineko®

Plus:

Vanilla and Cajun cardstock by Bazzill
Zip Dry™ Paper Glue by Beacon®
Zig™ 2-way Glue Pen by EKSuccess®

Instructions:

  1. Fold 11” x 4 ¼” Cajun cardstock in half to form card base.
  2. Cut ivory cardstock and a sticky panel to 5 ¼”x 4”
  3. Peel off one side of the sticky panel.
  4. Lay the cardstock on your table, hold the sticky panel up with the sticky side away from you, line up the edge of the sticky panel with the edge of the cardstock then lay it down on top.
  5. Peel off the other side of the sticky panel and pour on the Crystal Micro Glitter covering it completely.
  6. Tap off excess and return to the jar.
  7. Using the negative Jumbo leaf templates sponge leaves in different colors on the glitter panel. Glue panel to the card base.
  8. Stamp just the 2 bottom lines of the Thankful today stamp on 3/4’” x 2 7/8” vanilla cardstock, cut a V into the left side. Glue to 1” x 3” Cajun cardstock lining up the right sides. Cut a V leaving a small border. Glue to the bottom right of the card.
  9. Stamp the Fall Float House Mouse on 2 3/8” x 3 ½” vanilla cardstock with black ink. Color as desired. Glue to 2 5/8” x 3 ¾” Cajun cardstock. Add glitter cinnamon glitter with the glue pen.

Rose Corset Accordion Card by Fran Seiford

Supplies:Rose Corset Card by Fran Seiford

Rose Corset Side ViewFrom Stampendous

P126 Rose Corset
P136 Blossom Spray
GS402 Spray/Splatter Bottle
FREG024 Aged Gold Embossing Enamel
FREG026 Chunky Black Embossing Enamel
TP116 Tinsel Mahogany
FRG10C Shaved Ice
FRG04 Gold Halo Mix Glitter
FRG02C Champagne Glass Glitter
OR EJK09 Gold Encrusted Jewel Technique Kit
VM001 VersaMark Watermark Ink Pad

Plus
Pink Cardstock
Instant Coffee Granules and Water
Embossing Heat Tool
Pink Tulle
Pink and Rhinestone Button
Pink Decorator Chalk
Spoon, Pencil, Ruler, Scoring Tool, Craft Knife, Scissors, Cutting Mat
Paper Glue

Instructions:

  1. Dissolve coffee with hot water in spray bottle. Spritz pink cardstock. Add granules to damp paper. Allow to dry.
  2. Stamp Blossoms in rose coral on background of pink card. Stamp Blossoms on extra pink paper in VersaMark™ ink. Dust with Mahogany and heat to emboss. Cut out to create 2 clusters.
  3. Free download of card diagram can be downloaded at www.stampendous.com. Cut, score and fold card.
  4. Stamp Rose Corset in VersaMark™ ink on card front. Dust with black top and bottom and Gold in the midsection. Heat emboss from underneath to retain chunky granules.
  5. Glue blossom clusters to card.
  6. Use VersaMark™ ink along bottom edge of card. Hold with clip tool. Dust with Gold embossing enamel. Add Shaved Ice and glitters. Heat from underneath to melt.Repeat over blossoms.
  7. Use craft knife to cut under roses at waistline. Tuck netting under roses, drape around card and secure other end with embellishment.

Click link below to download pdf template for card.

TEMPLATE FOR CARD

 

 

 

 

Watch Fran make this card here –

Delicate Snowflakes by Janelle Stollfus

Supplies:Delicate Snowflakes by Janelle Stollfus

From Stampendous:
CRS5069 Cling Delicate Snowflakes
CRS5057 Jumbo Cling Rubber Snowflake Trio
D178 Believe Christmas
DCS5069 Snowflake Die Set
MEM01 Memento™ Tuxedo Black Ink by Tsukineko
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Wausau Paper
Vellum paper by Core’dinations®
Venetian Lace, Bon Voyage Blue, Triumphant Red, Antique Moss, Photogenic Black (Graphics 45 Decades Inks, Clearsnap)
White Thread
Sewing Machine
3-in-1™ glue by Beacon Adhesives®

Instructions:

  1. Make a top folding card base from a 5 1/2 x 8 1/2 inch cardstock with a finish size of 5 1/2 x 4 1/4 inches.
  2. Stamp Delicate Snowflakes in Bon Voyage Blue onto blue cardstock and straight stitch white thread around perimeter (optional). Glue to card base.
  3. Stamp snowflake from Jumbo Snowflake Trio set with water sprayed onto stamp. While impression is still wet, sponge ink over area. Let dry and sponge other colors around water stamped impressions.
  4. Stamp Believe Christmas in black ink.
  5. Stamp smaller snowflakes around edges to fill in blank areas. Glue to blue cardstock.
  6. Die cut snowflake with vellum. Add dots of 3-in-1 glue to a few corners of both pieces of snowflake and adhere onto card base.

House-Mouse® Santa Mouse by Kristine Reynolds

Supplies:HMCE01_KR_800

From Stampendous

HME01 Santa Mouse Stamp
R182 Holiday Giving Stamp
MEM01 Tuxedo Black Memento Ink Pad by Tsukineko
MGK02 Christmas Micro Glitter Kit

Plus
Red, Green and White Cardstock by Core’dinationsRed ink pad
Copic Markers
Spellbinders oval and scalloped oval Nestabilities Dies
Embossing Folder by Darice
Sand It Kit by Core’dinations
Die cutting machine
Glue Pen

Instructions:

  1. Fold a 5-1/2″ X 8-1/2″ panel of red cardstock in half to form card base.
  2. Layer a 5-1/4″ X 4″ panel of green cardstock on card front.
  3. Stamp Holiday giving in red ink on a 5″ X 3-3/4″ panel of white cardstock and adhere to green panel.
  4. Run a 3-3/4″ X 1-1/2″ strip of green cardstock through die cutting machine in embossing folder. Sand to reveal light green core.
  5. Glue embossed panel to card front as shown.
  6. Stamp Santa Mouse in Memento ink on white cardstock and die cut with appropriate oval die.
  7. Color image as desired.
  8. Layer image panel on a die cut green oval and a die cut red scalloped oval.
  9. Adhere to card front as shown.
  10. Use glue pen to add glitter to fur on hat and ground under feet.
1 2 3 10