Happy Valentine's Day by Laura Drahozal

INSTRUCTIONS

Base card stock is 8 1/2" by 5 1/4" folded on the side to 4 1/4" by 5 1/4".
Use the Acrylic Handle to stamp the Swan Pair or Ornate Heart image with Versamark on pink card stock.
Sprinkle with the Clear Pink Embossing Powder from the Spring Sparkle Embossing Powder and heat with the heat gun.
Tape the Happy Valentine's Day Stencil onto pink card stock with the removable tape.
 Be sure to lay one strip of tape all the way across the top of the stencil first, as this will act as a hinge later.  
Tape all the way around the stencil.
Use the Palette Knife to remove White Glossy Embossing Paste from the container and place it on the Paste Spreader.
 Create a strip of paste across the bottom of the spreader that is at least the width of the Valentine's stencil image.
Place the spreader on the top of the Valentine's Stencil and pull towards you, keeping the spreader in contact with the stencil and filling in all the wells.
Remove the excess paste from the spreader with the palette knife and replace into the container.
Carefully remove the tape from the bottom and sides of the stencil.
Lift the Valentine's stencil from a corner, using the top tape as a hinge until you can easily remove the stencil from the project area.
While the paste is still wet, cover with the Crystal Glitter and let dry.
When the paste is dry, shake the Valentine's image upside down to remove the excess glitter.
Assemble the card.
Print Project

Also uses these supplies:

Stampendous: R219 Kisses Galore (Retired) P251 Swan Pair or V143 Ornate Heart
SSH57 Jumbo Perfectly Clear Acrylic Handle
GX900U Snow Ultra Fine Crystal Glitter
EK20 Spring Sparkle Embossing Powder Kit
VM001 VersaMark™ Watermark Ink Pad by Tsukineko®
Dreamweaver: DWLM241 Happy Valentine's Day Stencil
DWDGWP White Glossy Embossing Paste
DWLM2010 Paste Spreader
DWDPK Palette Knife
Plus: Cardstock by Bazzill Basics Paper®
Scotch by 3M 1/2"
Adhesive Scotch® 1/2"
Adhesive Tape by 3M®
Embossing Heat Tool
Paper Trimmer

If you've use this product in a project of yours, we'd love to see it! You can submit your step-by-step instructions and supplies used by clicking below.

Submit A Project