Archive for accessory

Eclectic Charms Floral Necklace by Debbie Cole

Supplies:SSC1217_3_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
NKCRS05 Kaffee Klatsh Set
FRG16C Fuchsia Glass Glitter
FRG10C Shaved Ice
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Baby Pink, Sapphire, Sea Aqua, Turquoise, Wild Orchid Acrylic Paint by DecoArt®
Dazzling Metallics Shimmering Silver Acrylic Paint by DecoArt®
Media Fluid Acrylics Interference by DecoArt®
Matte Medium by DecoArt®
Jewelry Component by Industrial Chic®
Two Part Resin by ICE Resin
White Polymer Clay
Clay Circle Cutters
Paper
Patterned Paper
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
X-Acto Knife
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Begin by kneading the clay so that it is soft and workable. Roll it into a ball and roll the clay out using a rolling pin or acrylic roller to 1/8 inch depth. Spray the round rubber stamp of your choice from the set with a light mist of water and press firmly into the clay. Lift the stamp off the clay. Repeat two more times Cut out the main circle with appx 1 3/4 inch shape cutter. Cut out the center with a 1 inch shape cutter. Cut two more 1 inch circles form the other impressions. Poke holes into both sides 1 inch circles and insert eye hooks that have been trimmed to 1/2 inch.. Bake all the circles according to manufacturer’s instructions. Allow to cool.
  1. Paint over the clay randomly with- Baby Pink, Sapphire, Sea Aqua, Turquoise, Wild Orchid .Wipe off some of the paint using a paper towel to allow the undertones of the to show through. Allow to dry. Wash over all the circles with thinned Sappire allowing the paint to seek into the impressed areas. Allow to dry. Brush Interference Turquoise over all the circles. Allow to dry. Using your finger, wipe on Shimmering Silver to highlight.
  1. Stamp the bouquet twice onto paper. Colorize both with paint for the palette. Glue a piece of cardstock to the back of the circle to cover the hole. Fill the bottom of the hole with the embossing powder and heat set. The inside of the pendant is created using a layered technique. Begin by preparing the paper, sealing both sides with Decou-Page. Allow to dry. Repeat this step. Cut and glue background into place. Mix a small amount of Ice Resin following the manufacturer’s instructions. Pour just a small amount over the image and spread with a disposable paint brush. Allow to harden over night. Cut out lettering and apply brown color pencil around edges. Glue into place and add additional resin. Also use the resin as a varnish by brushing it over the clay. Allow to harden over night. To complete the necklace, combine the elements to form the necklace and attach with jump rings to the pendant.

 

Eclectic Charms Steampunk Mona Lisa Necklace by Debbie Cole

Supplies:SSC1217_ASCRS02_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
ASCRS02 Steampunk Set
SAS303 Royal Heart Stack Art Kit
FRL03 Copper Lux Mix
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Burnt Umber, Lamp Black, Medium Flesh, Raw Sienna, Snow White, True Blue, and True Ochre Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Matte Medium by DecoArt®
Large Circle Bezel by Art Mechanique
Cosmetic Sponges
Watch Parts
Bubble Palette
Paper Palette
Paper Towel
All Purpose Glue
Chain Necklace
Jump Rings
Beads
Craft Sticks
Disposable Measure Cups
Resin by ICE Resin

Instructions:

  1. This necklace is completed with the layered technique. Basecoat the paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Place the text stamp from the kit and place it onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Raw Sienna out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark. Wash over the entire area with transparent True Ochre. Allow to dry and stamp over this area with the Watch stamp using Burnt Umber. Cut to fit bezel. Coat with matte medium on both sides. Glue into the bottom of the bezel. Mix the resin following the manufacturer’s instructions and pour to coat the image. Allow to harden overnight.
  2. Apply glitter, and watch gears using glue to secure them into place. Allow to dry and add a small amount of resin to cover these items.
  1. Paint a small area of the paper with Snow White. Stamp the Mona stamp onto the dried paper with Lamp Black. Wash the face with Medium Flesh and the dress with True Blue. Cut out the image and coat with matte medium. Glue into position and pour the resin over the image to fill the bezel. Allow to dry overnight. Add charms, beads, and chain of choice using jump rings.

 

Eclectic Charms Pop Up Die Double Domino Necklace by Debbie Cole

Supplies:DCP1001_03_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
EP226 Champagne Embossing Powder
MPW811 Mixed Media White Paper
VM001 VersaMark™ Watermark Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Deep Burgundy Acrylic Paint by DecoArt®
Dazzling Metallics Shimmering Champagne Gold Acrylic Paint by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the smallest and second to largest rectangle dies cut six “of each using a Big Shot or similar machine. Align the large pieces, glue two sets of three together. Glue a bail or eye hook on the top of one set, then glue the two sets together. Paint the sides with Champagne Gold. Place the top into Versamark, sprinkle with Champagne embossing powder, and heat.
  2. Align the small pieces and glue together. Basecoat with Deep Burgundy. Coat with matte varnish.
  3. Place the scroll stamp from the kit onto an acrylic handle. Load the stamp with Versamark and stamp onto the colorized group. Sprinkle with Champagne embossing powder, remove excess powder, and heat. Glue to the base of the pendant.
  4. Mix the resin following the manufacturer’s instructions and coat the pendant. Allow to harden overnight. Add charms, beads, and chain of choice using jump ring.

 

 

Lovely Garden Butterfly Necklace by Debbie Cole

Supplies:DCP1001_CRS5066_DCS5066_DC_800

From Stampendous:
CRS5066 Cling Lovely Garden
DCS5066 Lovely Garden Die Set
CP811 Creative Palette
MPW811 Mixed Media White Paper
SSH34 Medium Perfectly Clear™ Acrylic Handle

Plus:
Americana® Cadmium Yellow, Lamp Black, Tangelo Orange, True Red Acrylic Paint by DecoArt®
Matte Medium by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Swarovski Crystals
Old Toothbrush
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the butterfly die, cut six butterflies to create the base of the pendant using a Big Shot or similar machine. Glue two sets of three cut outs together. Glue two eye hooks to the top corners of one set, then glue the two sets together. Paint the back and sides with Lamp Black.
  1. Using the Creative Palette, apply multiple drops of Cadmium Yellow, Tangelo Orange, and True Red onto the palette. Spread with brayer. Place the media paper into the paint, then lift.. Using a toothbrush and thinned paint, splatter randomly with True Red. Allow to dry
  1. Place the stamp from the kit onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the colorized paper. The details should be easily seen and not be too dark. Stamp the butterfly a second time. Cut both images out with the die. Float to shade the butterfly with Lamp Black. Coat with matte medium to seal.
  1. Mix the resin following the manufacturer’s instructions and coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Glue crystals to center of butterfly. Add charms, beads, and chain of choice using jump rings.

 

 

Eclectic Charms Kitty Necklace by Debbie Cole

Supplies:SSC1217_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
FRG13C Royal Blue Glass Glitter
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Americana® Baby Blue, Hauser Light Green, Lamp Black, Raw Sienna, Snow white, and True Ochre Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Matte Medium by DecoArt®
Medium Rectangle Bezel by Art Mechanique
Two Part Resin by ICE Resin
Cosmetic Sponges
Bubble Palette
Paper Palette
Paper Towel
All Purpose Glue
Chain Necklace
Jump Rings
Rhinestones
Beads
Craft Sticks
Disposable Measuring Cups

Instructions:

  1. The stamping and painting will need to be done twice since this necklace is completed with the layered technique. Basecoat the paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Place the cat stamp from the collection onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark. Repeat this process and stamp the cat a second time.
  1. Using a bubble palette, place about a dime size drop of True Ochre and Baby Blue into individual bubble. Create a mixture of three parts water and one part Easy Float. Mix one part paint with three parts water or enough water to make the paint transparent. Completely mix the paint in the bubble palette so there is no solid pigment. Using a #3 round wash in the cat with True Ochre and the background with Baby Blue. Wash in the second cat. Float to shade the second cat with True Ochre, then Raw Sienna. Fill in the iris of the eyes with Hauser Light Green. Allow to dry and coat both sides of the paper with matte medium.
  1. When dry, cut the first cat to fit into the bezel. If you have the die, you can run it through your machine. Manually cut out the cat from second image. Coat these images again with matte medium. Allow o dry and glue the first image to the bottom of the bezel. Allow glue to dry.
  1. Mix Ice Resin according to manufacturer’s instruction and pour it in to fill half of the bezel. Sprinkle a little blue glitter in the blue sections of the image. Allow to harden overnight. Glue the second cat into position. Mix a small amount of Ice resin again. Pour just enough to cover the cat. Allow to dry overnight. glue rhitstones into place and add some more glitter. Mix additional Ice Resin and fill the bezel. Allow to harden. Add charms, beads, and chain of choice using jump rings.