Archive for blossom

Orange Blossom by Debi Hammons

Supplies:W086_Orange Blossom Card_DH_800

From Stampendous:
W086 Orange Blossom
MPW811 Mixed Media White Paper
MEM01 Memento Tuxedo Black In by Tsukineko®
SSH57 Perfectly Clear Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Colored Pencils
Zip Dry™ Paper Glue by Beacon Adhesives
Twine by May Arts®

Instructions:

  1. Fold a 5 1/2 x 8 1/2 inch color cardstock in half to a finished 5 1/2 x 4 1/4 inch top fold card base.
  2. Stamp Orange Blossom with Tuxedo Black ink onto Mixed Media White Paper and color.
  3. Adhere image to color cardstock mat.
  4. Adhere onto card base
  5. Wrap twine around the front side of card base twice and tie in a knot.

Penned Friend by Lea Kimmel

Supplies:Q211_H315_LK_800

From Stampendous:
Q211 PenPattern Petal
H315 Penned Friend
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
FRM11 Teal Frantage Mica Fragments
FRC20 Hot Lime Frantage Color Fragments
FRC01 Powder Blue Frantage Color Fragments

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Memento™ Bahama Blue Ink by Tsukineko®
Radiant Neon™ Electric Blue Pigment Ink Refill by Tsukineko®
Radiant Neon™ Electric Green Pigment Ink Refill by Tsukineko®
Radiant Neon™ Electric Yellow Pigment Ink Refill by Tsukineko®
Radiant Neon™ Electric Blue Pigment Ink Pad by Tsukineko®
Liquitex® Airbrush Medium
Hug Snug® Seam Binding
Neenah® Classic Crest™ Solar White Cover Stock
3D Foam Mounting Squares by Scrapbook Adhesives®

Instructions:

  1. Create three spray mists using ink refills, mixing each with a small amount of airbrush medium
  2. Trim a piece of white cs to fit an A2 card base and spray with inks
  3. Using yellow spray mist, remove sprayer and drip ink onto paper, dry with heat gun
  4. Stamp flowers onto dried paper with Electric Blue ink
  5. Trim another piece of cs large enough for the sentiment, spray with misters and drip ink, dry as with the background piece
  6. Stamp sentiment with Bahama Blue ink and trim to desired size
  7. Create an A2 vertical card base and a mat for the sentiment from yellow cs
  8. Trim a piece of seam binding and spray it with misters, heat to dry
  9. Create a double bow from seam binding and attach to stamped background
  10. Adhere background piece to card base
  11. Attach matted sentiment to card with foam squares
  12. Mix green and blue color fragments with teal mica fragments
  13. Add bits of glue randomly around card, apply fragment mix, tap off excess

PenPattern Petal Cube by Kristine Reynolds

Supplies:Q211_Q212_ATB_KR_800

From Stampendous:
Q211 PenPattern Petal
Q212 PenPattern Flutter
MPW811 Fran’s Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
EJS07 Spoonful of Confetti
EJS06 Spoonful of Pixie Dust
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Sizzix Artist Trading Block die
Sizzix Little Sizzles Double-sided Mat Board
Radiant Neon Pigment Ink (Electric Purple-Electric Coral-Electric Pink-Electric Blue-Electric Yellow-Electric Green-Electric Coral)
Imagine Ink blusher sponges
Robin’s Egg Dew Drops
Copic .7 Multi Liner
Scrapbook Adhesives 3D Foam Squares
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Die cut a Little Sizzles Double-sided Mat Board using the Sizzix Artist Trading Block die
  2. Sponge Radiant Neon Pigment Ink all over the die cut box
  3. Stamp the Pen Pattern Flutter and Petal image on various sides of the box with black ink
  4. Color parts of the image with the multi liner
  5. Stamp the Flutter and Petal on white cardstock several times
  6. color parts of the images with the multi liner and then cut out
  7. Adhere the layers to the box with 3D foam squares
  8. Adhere dew drops to the center of the flowers
  9. Sprinkle Spoonful of pixie dust and confetti on the box and heat until melted
  10. Assemble box

Frantage Flowers Pop Up Die Necklace by Debbie Cole

Supplies:DCP1001_SSC1198_02_DC_800

From Stampendous:
SSC1198 Frantage Flowers Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
FRG01C Silver Crushed Glass Glitter
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana®  Desert Sand, Hauser Light Green, Traditional Burnt Umber, Whispering Turquoise Acrylic Paint by DecoArt®
Dazzling Metallics Silver Acrylic Paint by DecoArt®
Matte Medium by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Watch Parts
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the two largest rectangle dies, tape together, and cut eight “frames” to create the bezel using a Big Shot or similar machine. Glue the frames together to create the depth of the bezel. Basecoat with Silver.
  2. Cut two large backs for the bezels using craft board or heavy mixed media paper. Glue an eye hook or bail to the top of one of the cuts, then glue the two piece together. Base the back side with Silver. Do not glue the base to the frame until the first layer of the artwork is completed.
  3. The inside artwork is completed with the layered technique. Cut a piece of media paper using the large die. Base with Whispering Turquoise.
  4. Stamp the small flower stamp multiple times over the white paper. Place the stamp from the kit and place it onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Traditional Burnt Umber out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the white mixed media paper. The details should be easily seen and not be too dark. Float to shade the flowers that will be on the top layer with Desert Sand. Wash the leaves with thinned Hauser Light Green. Cut all flowers with matte medium to seal.
  5. Stamp the base of the die twice with the scroll from the set using Traditional Burnt Umber. Glue to top of base and coat with matte medium. Cut out and glue the first set of flowers on top of the base and trim. Glue the frame into position and allow to completely dry. Mix the resin following the manufacturer’s instructions and pour just enough to coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Cut the shaded flowers to the resin and allow to dry. Allow to completely dry. Mix the resin following the manufacturer’s instructions and pour to fill the bezel. Allow to harden overnight. Add charms, beads, and chain of choice using jump rings.

 

PenPattern Petal by Tenia Nelson

Supplies:Q211_SSC1220_TN_800

From Stampendous:
Q211 PenPattern Petal
SSC1220 Sisters Perfectly Clear™ Stamps
STF082 VersaFine™ Onyx Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics® and Michaels
Adhesive
Washi Tape
Fireworks Craft Spray in various colors
Spellbinders Circle Die
Circle Punch
Corner Punch
Enamel Dot
Patterned Paper by Studio Calico
Washi Tape
Big Shot

Instructions:

  1. Create card from light salmon cardstock.
  2. Stamp image onto white cardstock and add splatter.
  3. Die cut image with circle die and Big Shot. Add enamel dot in the middle of image.
  4. Adhere a piece of patterned paper onto green cardstock and round corner.
  5. Adhere image panel onto green panel using pop up dots.
  6. Stamp sentiment onto light pink cardstock, punch out using circle punch and adhere to green panel using pop up dots.
  7. Adhere green panel to card using pop up dots and add washi tape.