Archive for boys

ScrewLoose Night Sky by Pam Hornschu

Supplies:P260_1_PH_800

Stampendous:
P260 ScrewLoose Night Sky
SSC1219 ScrewLoose N Sparky Perfectly Clear™ Stamps
SSH38 Small Perfectly Clear™ Acrylic Handle
SSH34 Medium Perfectly Clear™ Acrylic Handle
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
FRC09 Purple Color Fragments
FRC16 Mint Color Fragments
MG01 Crystal Micro Glitter

Dreamweaver:
DWDEPT Translucent Embossing Paste
DWLM2010 Paste Spreader

Plus:
StazOn Jet Black Ink by Tsukineko®
Black, Grey, Mint, & Violet Card Stock by Bazzill Basics Paper®
Copic® Markers
Zip Dry™ Paper Glue by Beacon Adhesives
Fast Finish™ by Beacon Adhesives
Paint Brush
3D Foam Squares by Scrapbook Adhesives® by 3L®
Acetate

Instructions:

  1. Create 5 1/2″ square “step card” from gray cardstock.
  2. Create an extra “step” by cutting an extra section of gray cardstock sized 5 1/2″ X 4″. Score and fold along the short side at 1/4″ (Valley) 1/2″ (Mountain) 1 1/2″ (Mountain) 2″ (Valley) and 3″ (flat). Adhere along edge of card.
  3. Mix a small amount of translucent paste with some sprinkles of Color Fragments. Spread over black cardstock panel smoothly. Let dry.
  4. Stamp Night Sky image once on a panel of acetate, and once on mint cardstock. Add shading with markers to image on mint. Cut out and adhere over stamped image on acetate. Lightly brush Fast Finish over acetate panel, avoiding the adhered images. Sprinkle with glitter. Let dry. Adhere to front step.
  5. Stamp images from clear set over violet strips. Cut away half of a couple “gears”. Fold up for added dimension. Adhere strips  to base and step.
  6. Mat pasted and sprinkled panel with violet cardstock. Adhere to back step of card.
  7. Stamp “wow” on mint scrap. Cut out and adhere to the pasted panel with foam tape. If necessary, add foam strips in valley fold where extra step attaches.

Screwy Pals by Fran Seiford

Supplies:M323_FS_800

From Stampendous:
M323 Screwy Pals
SSC014 Typewriter Alphabet Perfectly Clear™ Stamps
SSC1168 Vintage Uppercase Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
EJS05 Spoonful of Rust Kit
SSH34 Small Perfectly Clear Acrylic Handle
GS402 Spray/Splatter Applicator Bottle

Plus:
Cardstock by Bazzill Basics®
Instant Coffee
Colored Pencils
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Fold an 8 x 9 1/4 inch cardstock in half to a finished 4 x 9 1/4 inch top fold card base.
  2. Create sentiment with letters from Typewriter Alphabet and Vintage Uppercase using Tuxedo Black on card base.
  3. Spray with coffee made with instant coffee and water in the splatter spray bottle.
  4. Sprinkle Spoonful of Rust onto sentiment panel and heat emboss from the back side of cardstock.
  5. Stamp Screwy Pals with Tuxedo Black onto light color cardstock and color.
  6. Heat emboss with Spoonful of Rust as before.
  7. Tear edges of image and larger dark color cardstock.
  8. Glue together and then onto card base.

See Fran using the Spoonful Kits here.

ScrewLoose N Sparky by Janelle Stollfus

Supplies:SSC1219_JS_800

From Stampendous:
SSC1219 ScrewLoose N Sparky Perfectly Clear™ Stamps
DP100 Detail White Embossing Powder
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
VM001 Versamark Watermark Ink by Tsukineko®
MPW811 Mixed Media White Paper
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Core’dinations®
Clear Acetate
Sketch™ Markers by Copic® (Y00, Y06, Y13, Y21, Y26, Y28, YG13, G07, R12, R24, R35, R39, B60, B63, N1, N6)
Marker Airbrush System by Copic®
Various Ink™ Blender Solution by Copic®
Snow White acrylic paint by DecoArt®
WeeScapes Blended Grass Mat by Simi Creative Products (SCP)
WeeScapes Grass by Simi Creative Products (SCP)
Zip-Dry™ Glue by Beacon Adhesives®
Ribbon by May Arts Ribbons®
Muslin fabric

Instructions:

  1. Fold a 5 1/2 x 8 1/2 cardstock in half with a finished size of 5 1/2 x 4 1/4 side fold card base.
  2. Stamp Screwloose with sentiment and Sparky in Tuxedo Black ink onto Mixed Media White Paper and color. Cut out both pieces.
  3. Stamp Sparky’s light from his head onto clear acetate with Versamark Watermark ink and emboss with Detail White embossing powder. Trim and glue onto the back of Sparky cut out with Zip-Dry paper glue.
  4. Cut three wavy hill shapes as shown in finished card with white paper. Glue top and bottom one onto Weescapes Blended Grass Mat and trim around white cardstock paper.
  5. On middle hill airbrush with gray markers to make sidewalk, use muslin fabric damp with Blender Solution to press into gray color to create texture.
  6. On white paper airbrush sky.
  7. Arrange wavy hills and sidewalk on bottom half of the sky paper and glue down.
  8. Paint clouds with acrylic paint and brush.
  9. Glue Screwloose onto sidewalk. Glue Sparky onto bottom hill. Add glue around feet and sprinkle with Weescapes Grass. Shake off excess and return to container.
  10. Glue image layer onto skewed colored cardstock and glue onto card base.
  11. Glue strip of ribbon across front of card. Trim excess.

 

ScrewLoose N Sparky Pop Up Card by Kristine Reynolds

Supplies:SSC1219_DCS1001_inside_KR_800

From Stampendous:
SSC1219 ScrewLoose N Sparky Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
MPW811 Fran’s Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
EJS01 Spoonful of Silver
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Best Creations Inc. Patterned Paper
Copic Markers (B19-Y35-YR61-YR65-YR68-B12-B14-B16-B18-R59-YG25-BG49-BG45-B000-B01-YG21-YG23-YG25)
Heat Tool
Scrapbook Adhesive 3D foam squares
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Fold an 11″ x 4 1/4″ panel of blue cardstock in half to create a top folding A2 card
  2. Adhere paper panels to the front of the card
  3. Stamp images on a white panel of cardstock with black ink and color with markers
  4. Adhere panel to a slightly larger orange panel and then adhere to the card
  5. Sprinkle Spoonful of Silver on the card front and heat from underneath until melted
  6. stamp sentiment and color and cut out before adhering to card with 3D foam
  7. Die cut a panel of patterned paper with the Pop Up Die and adhere to the inside of the card
  8. Stamp Screwloose image and multiple gears on white cardstock with black ink and color with markers
  9. Cut out images and adhere to flaps created by the die

SSC1219_DCS1001_front_KR_800

ScrewLoose by Kristine Reynolds

Supplies:

From Stampendous:
Q1213 ScrewLooseQ123_SSC1219_2_kr_800
SSC1219 ScrewLoose N Sparky Perfectly Clear™ Stamps
EJS01 Spoonful of Silver
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH34 Medium Perfectly Clear™ Acrylic Handle
MPW811 Mixed Media White Paper

Plus:
Cardstock by Bazzill Basics®
Patterned Paper by Recollections®
Copic® Markers (YR00-YR02-YR04-BG10-BG11-BG13-YG00-YG02-YG03)

Ribbon by May Arts
Dies by Spellbinders™ Paper Arts
Zip Dry™ Paper Glue by Beacon Adhesives
Scrapbook-Adhesive™  3D foam squares

Instructions:

  1. Fold a 10 1/2″ x 5 1/4″ turquoise panel in half to create a top folding 5 1/4″ square card base.
  2. Adhere patterned paper layers to the card as shown.
  3. Tie ribbon around the card.
  4. Stamp images on a white panel and color with Copic Markers.
  5. Back image with a slightly larger Turquoise panel and adhere to card.
  6. Stamp sentiment on a white panel and cut it out.
  7. Color and adhere to card with 3D foam square.
  8. Sprinkle Spoonful on Silver on card and heat from underneath to melt.
  9. Stamp sentiment on a white die cut circle and back with orange, green, and turquoise die cut panels.
  10. Adhere this panel to card.