Archive for bunny

HappyHoppers® Bottle Baby by Jamie Martin

Supplies:HHCM03_SSC1187_FREG029_FX71_JM_800

Stampendous:
HHM03 Bottle Baby
SSC1187 Baby Balloon Perfectly Clear™ Stamps
FREG029 Shabby Blue Embossing Powder
FX71 Sticky Panels
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
AC672HSP Dot Sparklers

Plus:
Cardstock by Bazzill Basics Paper®
Ribbon by May Arts
Zip Dry™ Paper Glue by Beacon Adhesives
3D Foam Squares by Scrapbook Adhesives® by 3L®
Fabri-Tac by Beacon Adhesives
Colored Pencils by Prismacolor®
White Gel Pen

Instructions:

  1. Stamp Bottle Bunny on white paper with black ink and color with pencils.
  2. Sprinkle Shabby Blue Embossing Enamel on the bottom and heat from underneath.
  3. Cut the top corners of the panel and layer onto pink.  Set aside.
  4. Place a piece of Fran’s Sticky Panels onto white cardstock, and diecut with a heart shape.  Also cut a heart from pink and blue papers.
  5. Remove the carrier from the Fran’s Sticky Panels heart, sprinkle with Shabby Blue and emboss.
  6. Diecut a circle from white and blue papers.  Cut the blue in half and glue to the bottom of the white circle.
  7. Stamp sentiment on the white half with blue ink.  Layer onto a pink scalloped circle and dot with a white gel pen.  Add pink Dot Sparklers.
  8. Glue ribbon to a blue card and glue stamped pieces as shown.

HappyHoppers® Bottle Bunny by Pam Hornschu

Supplies:HHM03_DWLX7023_1_PH_800

Stampendous:
HHM03 Bottle Bunny
SSCM5001 Hoppy Moments
SSH38 Small Perfectly Clear™ Acrylic Handle
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
MPW811 Mixed Media White Paper

Dreamweaver:
DWLX7023 Large Scales

Plus:
Vintage Cardstock by Core’dinations®
Silk Ribbon by May Arts
Sea Breeze VersaMagic™ by Tsukineko®
Copic® Markers
Baker’s Twine
Zip Dry™ Paper Glue by Beacon Adhesives
Sanding Block
1/16″ hole punch

Instructions:

  1. Cut and fold Vintage cardstock to create six inch square card.
  2. Machine emboss front of card with Dreamweaver Large Scales stencil. Use sanding block to remove color from embossed areas. Swipe Sea Breeze ink over surface to add color.
  3. Stamp image on white cardstock panel in black ink. Color and shade with markers.
  4. Wrap panel with ribbon, and tie at edge. Adhere to card with Zip Dry.
  5. Create long tag from cardstock scrap. Punch hole at one end. Stamp sentiment in black ink. Attach tag with baker’s twine bow.

HappyHoppers® Bottle Bunny by Kristine Reynolds

Supplies:HHM03_SSC1190_kr_2_800

Stampendous:
HHM03 Bottle Bunny
SSC1190 Say It Today Perfectly Clear™ Stamps
MPW811 Mixed Media White Paper
SSH34 Medium Perfectly Clear™ Acrylic Handle
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Dreamweaver:
DWLX7023

Plus:
Card Stock by Bazzill Basics Paper®
Card Stock by Core’dinations®
Memento™ Rose Bud Ink by Tsukineko®
Copic® Markers (YR21, YR23, YR24, E50, E51, E93, B000)
Scallop Border Punch by EKSuccess®
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Fold a 8 1/2″ x 5 1/2″ piece of pink cardstock in half to create a top folding card.
  2. Dry emboss a panel of darker pink paper with the stencil and then sand to expose the lines.
  3. Back panel with a larger white panel.
  4. Punch the bottom edge of the panel and adhere to the card.
  5. Stamp image on a white panel and color with markers.
  6. Back panel with a larger dark pink panel and adhere to the card.
  7. Cut banners from dark pink and white scraps and adhere to card.
  8. Stamp sentiment with Rose Bud ink.

HappyHoppers® Bottle Bunny Blue by Kristine Reynolds

Supplies:HHM03_SSC1190_kr_800

Stampendous:
HHM03 Bottle Bunny
SSC1190 Say It Today Perfectly Clear™ Stamps
SSH34 Medium Perfectly Clear™ Acrylic Handle
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
MPW811 Mixed Media White Paper

Dreamweaver:
DWLX7023
DWDEP Regular Embossing Paste

Plus:
Cardstock by Bazzill Basics Paper®
Copic® Markers (W5, W3, W1, E50, E51, E93, B000)
Royal Stand Up Card Die by Sizzix®
Ribbon by May Arts
Scrapbook Adhesive® 3D Foam Squares
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Stencil the Cathedral Windows stencil on light blue cardstock with white embossing paste and allow to dry.
  2. Die cut the card base out of darker blue cardstock.
  3. Die cut the stenciled panel and adhere to card.
  4. Tie white ribbon around the card.
  5. Stamp Bottle Bunny image on whte cardstock with black ink and color with markers.
  6. Cut out panel with Sizzix Royal die leaving the bunny’s ear “out of the box” and then adhere to card base with foam squares.
  7. Stamp sentiment on a white panel and adhere to inside of card.
  8. Add a strip of left over stenciled paper underneath the sentiment panel.

HappyHoppers® Cake Nibbler by Janelle Stollfus

Supplies:HHV05_SSC1141_JS_800

From Stampendous:
HHV05 Cake Nibbler
SSC1114 Friendly Phrases Perfectly Clear™ Stamp Set
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
MWP811 Mixed Media White Paper
SSH34 Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Core’dinations®
Acohol Markers by Copic® (E11, E13, E15, E18, E30, B91, B93, B97, BG000, BG01, BG05, BG72, G20, YG61, YG63, Y11, Y21, YR21, R20, R81, 0)
Airbrush System by Copic®
Zip Dry™ Paper Glue by Beacon Adhesives
Circle Punches or Nesting Dies
Corner Rounder Punch
Sand-It Gadget by Core’dinations®
Dust Buddy Cloth by Core’dinations®

Instructions:

  1. Fold over a 5 1/2 x 8 1/4 inch piece of cardstock to a 5 1/2 x 4 1/4 inch card base and sand edges with the Sand-It Gadget and Dust Buddy cloth.
  2. Cut a piece of pattern paper and glue onto card base.
  3. Stamp Cake Nibbler onto Mixed Media White Paper with Tuxedo Black ink and color.
  4. Mask the image by stamping and cutting out image on sticky notes.
  5. Use airbrush system with a sticky note to mask off foreground and background.
  6. Use corner rounder on image and adhere onto a two layer textured cardstock with edges sanded.
  7. Layout colored image with various circle shapes, tucking some under the matted edge and glue them onto card base.
  8. Stamp sentiment on white cardstock with Tuxedo Black ink and cut out in a circle shape to adhere to card base, trimming circle to the edge of card base.