Archive for butterfly – Page 2

PenPattern Petal Cube by Kristine Reynolds

Supplies:Q211_Q212_ATB_KR_800

From Stampendous:
Q211 PenPattern Petal
Q212 PenPattern Flutter
MPW811 Fran’s Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
EJS07 Spoonful of Confetti
EJS06 Spoonful of Pixie Dust
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Sizzix Artist Trading Block die
Sizzix Little Sizzles Double-sided Mat Board
Radiant Neon Pigment Ink (Electric Purple-Electric Coral-Electric Pink-Electric Blue-Electric Yellow-Electric Green-Electric Coral)
Imagine Ink blusher sponges
Robin’s Egg Dew Drops
Copic .7 Multi Liner
Scrapbook Adhesives 3D Foam Squares
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Die cut a Little Sizzles Double-sided Mat Board using the Sizzix Artist Trading Block die
  2. Sponge Radiant Neon Pigment Ink all over the die cut box
  3. Stamp the Pen Pattern Flutter and Petal image on various sides of the box with black ink
  4. Color parts of the image with the multi liner
  5. Stamp the Flutter and Petal on white cardstock several times
  6. color parts of the images with the multi liner and then cut out
  7. Adhere the layers to the box with 3D foam squares
  8. Adhere dew drops to the center of the flowers
  9. Sprinkle Spoonful of pixie dust and confetti on the box and heat until melted
  10. Assemble box

Beautiful Life Pop Up Card by Kristine Reynolds

Supplies:V273_CRS5044_inside_KR_800

From Stampendous:
V273 Beautiful Life
CRS5044 Jumbo Butterfly Trio
DCS5071 Butterflies Die Set
DCP1001 Pop-Up Die Set
MPW811 Fran’s Mixed Media White Paper
CP811 Creative Palette
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
EJS01 Spoonful of Silver Embossing Elements
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Deco Art Paint
Prisma Color Pencils
EK Success Border Punch
Spellbinders® Nestabilities™ Labels Thirty-Six
Spellbinders® M-Bossabilities™ ES-008
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:V273_CRS5044_front_KR_800

  1. Create a painted background panel by adding drops of paint on the Creative Palette and spreading with a roller
  2. Press a piece of Mixed Media paper on the palette and press evenly, then set aside to dry
  3. For the card front: Create a 5 1/4″ square card by folding a 10 1/2″ x 5 1/4″ panel of lavender cardstock in half
  4. Stamp sentiment on the top of the card with black ink
  5. Punch the bottom of a 5 1/4″ x 2 1/2″ panel of blue cardstock and then adhere to card
  6. Use die from Pop-Up Die set to cut a panel out of the painted panel and adhere to card
  7. stamp Butterflies on white cardstock with black ink and color with pencils before using the butterfly dies to cut them out.
  8. Adhere one of the large die cut butterflies to the card front
  9. Sprinkle Spoonful of Silver on the card front and heat from underneath until melted
  10. Punch the edges of a 5 1/4″ x 10 1/2″ panel of blue cardstock and adhere inside card
  11. Die cut Pop-up panel from painted panel with Pop-up Die and adhere to inside of card
  12. Adhere remaining Butterflies to the pop up pieces so that they pop out
  13. Die Cut purple panel and emboss with butterfly folder
  14. Stamp sentiment on a smaller die cut white panel and back with purple embossed panel before adhering to inside of card
  15. Sprinkle Spoonful of Silver inside card and heat until melted

 

PenPattern Flutter by Wendy Price

Supplies:

From Stampendous:
Q212 PenQ212_CP475_WP_800Pattern Flutter
CP475 Creative Palette Rectangles
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Radiant Neon Ink Refill (Electric Blue, Electric Yellow, Electric Coral, Electric Pink)
Spectrum Noir Markers (IB2)
Bling

Instructions:

  1. Ink small rectangle Creative Palette with Radiant Neon ink refills. Press square stamp from Creative Palette Rectangle set onto palette to remove ink.
  2. Place paper on Creative Palette, rub and pull off. Allow to dry. Stamp with Coral Radiant Ink using square stamp.
  3. Stamp butterfly, color with markers and cut out.
  4. Ink square pattern stamp in Versamark, stamp on butterfly and emboss with clear embossing powder.
  5. Assemble card using background paper you created with the Creative Palette, butterfly stamped image and bling.

Lovely Garden Butterfly Necklace by Debbie Cole

Supplies:DCP1001_CRS5066_DCS5066_DC_800

From Stampendous:
CRS5066 Cling Lovely Garden
DCS5066 Lovely Garden Die Set
CP811 Creative Palette
MPW811 Mixed Media White Paper
SSH34 Medium Perfectly Clear™ Acrylic Handle

Plus:
Americana® Cadmium Yellow, Lamp Black, Tangelo Orange, True Red Acrylic Paint by DecoArt®
Matte Medium by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Swarovski Crystals
Old Toothbrush
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the butterfly die, cut six butterflies to create the base of the pendant using a Big Shot or similar machine. Glue two sets of three cut outs together. Glue two eye hooks to the top corners of one set, then glue the two sets together. Paint the back and sides with Lamp Black.
  1. Using the Creative Palette, apply multiple drops of Cadmium Yellow, Tangelo Orange, and True Red onto the palette. Spread with brayer. Place the media paper into the paint, then lift.. Using a toothbrush and thinned paint, splatter randomly with True Red. Allow to dry
  1. Place the stamp from the kit onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the colorized paper. The details should be easily seen and not be too dark. Stamp the butterfly a second time. Cut both images out with the die. Float to shade the butterfly with Lamp Black. Coat with matte medium to seal.
  1. Mix the resin following the manufacturer’s instructions and coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Glue crystals to center of butterfly. Add charms, beads, and chain of choice using jump rings.

 

 

Eclectic Charms Butterfly Necklace by Debbie Cole

Supplies:SSC1217_4_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
ASCRS02 Steampunk
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Avocado, Burnt Umber, Lamp Black, Medium Flesh, Raw Sienna, Snow White, & True Ochre Acrylic Paint by DecoArt®
Metallic Lustre Copper Kettle Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Matte Medium by DecoArt®
Key Bezel with Round Center by Art Mechanique
Two Part Resin by ICE Resin
Copper Polymer Clay
Bubble Palette
Paper Palette
All Purpose Glue
Chain Necklace
Jump Rings
Beads
Craft Sticks
Disposable Measuring Cups

Instructions:

 

  1. Knead the clay and roll out to 1/8″ to 1/4 ” depth. Press key wings stamp into to clay and cut the wings out with a Xacto Knife. Cut the wings in half and press onto the key bezel. Reinforce the wings to bezel by adding a small amount of clay to the back of the bezel. Bake in oven according to the manufacturer’s instructions.
  2. Basecoat a 2″ square piece of paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Wash the entire piece of paper with thinned Medium Flesh.
  3. Place the Mona stamp from the kit onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark.
  4. Wash over the entire the background with True Ochre. Float next to the face with Avocado and around the face with Medium Flesh. Float around the outer edge with Raw Sienna.
  5. Wash over the clay wings with thinned Lamp Black and wipe off to reveal the texture. Rub with Copper Kettle to highlight.
  6. Mix the resin following the manufacturer’s instructions and pour to coat the image and the wings. Allow to harden overnight.
  7. Add chain and beads of your choice.