Archive for color fragments

Tiered Dress by Lea Kimmel

Supplies:P255_L261_LK_800

From Stampendous:
P255 Tiered Dress
L261 Penned Celebrate
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
FRC19 Amethyst Frantage Color Fragments
FRC01 Powder Blue Frantage Color Fragments
MC06 Lavender Micro Glitter

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
Neenah® Classic Crest™ Solar White Cover Stock
Tim Holt® Distress Ink in Shabby Shutters
Memory Box® Viola 6×6 Paper Collection
Copic® Markers:  BV01, BV02, BV04, BV08

Instructions:

  1. Stamp dress and color
  2. Trim image to desired size and edge with distress ink
  3. Stamp sentiment, trim and ink with distress ink
  4. Create vertical A2 card base with a tent fold and a mat for all images from lavender paper
  5. Adhere all layers as shown, using foam squares to mount sentiment
  6. Adhere glitter to front of dress
  7. Mix fragments and adhere as shown

Single Adirondack by Lea Kimmel

Supplies:Q210_L260_LK_800

From Stampendous:
Q210 Single Adirondack
L260 Relax Enjoy
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
FRM11 Teal Frantage Mica Fragments
FRC20 Hot Lime Frantage Color Fragments
FRC01 Powder Blue Frantage Color Fragments

Plus:
Cardstock by Bazzill Basics®
Zip Dry™ Paper Glue by Beacon Adhesives
My Mind’s Eye Fine and Dandy 6×6 Designer Paper Pad
My Mind’s Eye Quite Contary 6×6 Designer Paper Pad
Neenah Classic Crest Solar White Cover Stock
Copic Markers:  BG000, BG01, BG02, BG05, YG11, YG13, YG17, N2, Y00, Y06, Y13, Y38, E40, E41, E42, C1, B0000, YG93, YG95

Instructions:

  1. Stamp image and color, trim image into a square
  2. Create a 5″ square card base with a tent fold from teal cardstock
  3. Trim a piece of white cs into a 4.75″ square, adhere to card base
  4. Using two different dot pattern papers, trim four squares, two from each paper into 2.25″ squares, adhere to card base as shown
  5. Stamp sentiment and trim close to edges
  6. Create a mat for the sentiment from teal cs and layer the two pieces
  7.  Attach sentiment with foam squares
  8. Mix fragments and adhere to lower left corner of image as shown

PenPattern Petal Cube by Kristine Reynolds

Supplies:Q211_Q212_ATB_KR_800

From Stampendous:
Q211 PenPattern Petal
Q212 PenPattern Flutter
MPW811 Fran’s Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
EJS07 Spoonful of Confetti
EJS06 Spoonful of Pixie Dust
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Sizzix Artist Trading Block die
Sizzix Little Sizzles Double-sided Mat Board
Radiant Neon Pigment Ink (Electric Purple-Electric Coral-Electric Pink-Electric Blue-Electric Yellow-Electric Green-Electric Coral)
Imagine Ink blusher sponges
Robin’s Egg Dew Drops
Copic .7 Multi Liner
Scrapbook Adhesives 3D Foam Squares
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Die cut a Little Sizzles Double-sided Mat Board using the Sizzix Artist Trading Block die
  2. Sponge Radiant Neon Pigment Ink all over the die cut box
  3. Stamp the Pen Pattern Flutter and Petal image on various sides of the box with black ink
  4. Color parts of the image with the multi liner
  5. Stamp the Flutter and Petal on white cardstock several times
  6. color parts of the images with the multi liner and then cut out
  7. Adhere the layers to the box with 3D foam squares
  8. Adhere dew drops to the center of the flowers
  9. Sprinkle Spoonful of pixie dust and confetti on the box and heat until melted
  10. Assemble box

Bird Gears by Pam Hornschu

Supplies:R222_SSC1217_CP750_PH_800

From Stampendous:
R222 Bird Gears
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
CP475 Creative Palette Rectangles
VM001 VersaMark™ Watermark Ink by Tsukineko®
FREG027 Shabby White Embossing Enamel
FRC25 Party Fragments
MPW11 Mixed Media White Paper
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
SSH38 Small Perfectly Clear™ Acrylic Handle
GS402 Spray/Splatter bottle

 

Plus:

Deep Lagoon Memento ink by Tsukineko®
Teal Dotted Swiss Cardstock by Bazzill Basics®
Mesh Screen from Dreamweaver Stencils®
Web and ribbon from May Arts®
Gem Tac from Beacon Adhesives®
Metal word frame
Cyan and Yellow Green Tube Acrylic by Grumbacher®
Corner rounder
Glue marker
Metal gears
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Top fold 5 ½” X 11” teal cardstock to create 5 ½” square card.
  2. Apply dabs of acrylic paints to Creative Palette. Spray with water to create movement.
  3. Place screen on surface, and set face up on scrap paper. Place a panel of white cardstock over the top to transfer the paint and the pattern. Repeat with Bird Gears stamp and second cardstock panel. Set panels aside to dry. Clean palette.
  4. Round top corners of bird panel. Apply glue marker around edge and sprinkle with fragments. Layer and adhere both panels on card, with scrap of web in between.
  5. Coat two gears and metal word frame with Versamark and heat emboss with Shabby White (careful! Hot!). Adhere gears to card as desired. Sprinkle more Shabby White on card and heat from underneath to melt.
  6. Stamp sentiment on scrap of teal cardstock with blue ink. Adhere inside frame with Gem Tac. Insert ribbon through frame, wrap and tie over front of card.

House-Mouse® Birthday Donut by Kristine Reynolds

Supplies:HMQ13_H311_kr_800

From Stampendous:
HMQ13 Birthday Donut
H311 Penned Birthday
EJS07 Spoonful of Confetti
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH34 Medium Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Patterned Paper by DCWV®
Memento®  Bahama Blue dye ink
Copic® Markers (E50-E51-E93-Y15-Y08-Y02-YG23-YG21-RV10-RV13-RV14-YR21-YR23-YR24-E21-E23-E25)
Dies by Spellbinders™ Paper Arts
Zip Dry™ Paper Glue by Beacon Adhesives
Scrapbook-Adhesives®  3D Foam Squares

Instructions:

  1. Fold an 11″ x 4 1/4″  piece of green cardstock in half to create a 5 1/2″ x 4 1/4″ top folding card.
  2. Adhere paper panels to card.
  3. Stamp image on a white die cut circle panel and color with markers.
  4. Back panel with a slightly larger orange die cut circle and then adhere to card.
  5. Stamp sentiment on a white die cut panel with blue ink.
  6. Back image with a pink scallop edge dye cut panel and then adhere to card with 3D foam squares.
  7. Sprinkle  Spoonful of confetti on card and heat from underneath until melted.