Archive for floral

Frantage Flowers Pop Up Die Poppy Necklace by Debbie Cole

Supplies:DCP1001_SSC1198_SSC1177_DC_800

From Stampendous:
SSC1198 Frantage Flowers Perfectly Clear™ Stamps
SSC1177 Butterfly Charms Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
FRG02 Champagne Crushed Glass Glitter
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Deep Burgundy, Desert Sand, Hauser Light Green, Lamp Black, Medium Flesh, Traditional Burnt Umber Acrylic Paint by DecoArt®
Dazzling Metallics Shimmering Glorious Gold Acrylic Paint by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the two largest oval dies, tape together, and cut eight “frames” to create the bezel using a Big Shot or similar machine. Glue the frames together to create the depth of the bezel. Basecoat with Glorious Gold.
  1. Cut two large backs for the bezels using craft board or heavy mixed media paper. Glue an eye hook or bail to the top of one of the cuts, then glue the two pieces together. Base the back side with Glorious Gold. Do not glue the base to the frame until the first layer of the artwork is completed.
  1. The inside artwork is completed with the layered technique. Cut a piece of media paper using the large die. Base with Desert Sand. Allow to dry and stamp with all stamps using Traditional Burnt Umber. Wash in the butterfly and large flower with Deep Burgundy and the stem with leaves with Hauser Light Green. Cut out the base with the large oval and glue the bezel together. Mix the resin following the manufacturer’s instructions and pour just enough to coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Stamp the flower and butterfly stamps multiple times over the white paper. Place the stamp from the kit and place it onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the white mixed media paper. The details should be easily seen and not be too dark. Wash over the entire flower and butterfly with Medium Flesh, then shade with Deep Burgundy. Cut all images with matte medium to seal.
  1. Glue images to resin and allow to dry. Allow to completely dry. Mix the resin following the manufacturer’s instructions and pour to fill the bezel. Allow to harden overnight. Add charms, beads, and chain of choice using jump rings.

 

Spring Bouquet Gift Bag by Kristine Reynolds

Supplies:CRS5045_M289_KR_800

From Stampendous:
CRS5045 Cling Jumbo Spring Bouquet
M289 Feliz Cumpleanos
MPW811 Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Recollections Gift Bag
Copic Markers (BV08-YG00-YG01-YG03-G20-G21-G24-Y17-Y08-Y02-YR12-YR14-R22-R24-RV00-RV02-RV04-YR00-YR02-YR04)
Memento™ Dandelion Dye ink by Tsukineko®
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Adhere cardstock strips to the front of the bag
  2. Stamp Bouquet on a piece of white cardstock and color with markers
  3. Cut out bouquet and adhere to bag
  4. Stamp sentiment on a white die cut oval panel with black ink
  5. Sponge yellow ink around the edges of the oval panel
  6. Back panel with a larger scallop edge purple panel and then adhere to bag
  7. Stamp butterfly and color with markers
  8. Cut out butterfly and adhere to bag leaving the wings free

 

Build a Bouquet Rose & Daisy Pop Up Card by Kristine Reynolds

Supplies:CRS5074_SSC1214_DCS5074_DCP1001_inside_KR_800

From Stampendous:

CRS5074 Build a Bouquet
SSC1214 Happy Greetings
DCS5074 Bouquet Die Cut Set
DCP 1001 Build a pop up die set
MPW811 Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
We R Memory Keepers Patterned Paper
Spellbinder rectangle dies
May Arts Ribbon
Copic Markers: YG21-YG23-YG25-BG000-B0000-YG0000-Y00-Y08-Y17-B000-R01-R02-R05
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Create an A2 top folding card from green cardstock (fold a 11″ x 4 1/4″ paper in half)
  2. Adhere paper panels to the card front with Zip Dry
  3. Tie ribbon around the card
  4. Stamp sentiment on a white die cut panel and back with a die cut patterned paper panel
  5. Adhere to a green die cut scallop edge panel and then adhere to card
  6. For the inside of the card die cut a 4 1/4″ panel of patterned paper with the Pop Up die and adhere to the inside of the card
  7. Stamp the Build a Bouquet images on white cardstock and color with markers
  8. Die cut colored pieces and adhere to the Flaps to create the popped up vase of flowers
  9. Stamp sentiment on a white die cut panel
  10. Adhere to a larger green die cut panel and then adhere to card as shown

CRS5074_SSC1214_DCS5074_DCP1001_front_KR_800

Build a Bouquet Pop Up Card by Kristine Reynolds

Supplies:CRS5074_SSC1214_DCS5074_DCP1001_2_inside_KR_800

From Stampendous:
CRS5074 Build a Bouquet Set
SSC1214 Life Words
H312 Penned Thank You
DCS5074 Build a Bouquet Die Cut Set
DCP1001 Build a pop up die set
CP750 Creative Palette Rounds
CP811 Creative Palette
MPW811 Mixed Media White paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Deco Art Paint Ultramarine Blue, Hansa Yellow, Opaque White
Craft Smart Orange acrylic paint
Copic Markers Y35-Y38-yr68 G000-BG93-BG96-BG99-BG000-C00-C1-C3-T1-BG0000-B41-B45-B32
May Arts Ribbon
Memento Tangelo dye ink
Memento Bamboo Leaves dye ink
Brayer
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Add dollops of paint to the Creative palette and spread with a brayer
  2. Use stamps from the Creative Palette Rounds set and stamp on the palette to remove paint and leave pattern
  3. Press a piece of white cardstock on to the palette and press to cover the paper with the painted pattern
  4. Create the card front by cutting out a 4″ by 4 3/4″ panel of the paper you create and backing it with a slightly larger yellow panel
  5. Add a die cut orange strip to the bottom portion of the panel and tie ribbon around the panel
  6. Adhere the panel to a top folding A2 green card
  7. Stamp sentiment on a white die cut panel with orange ink and adhere to card
  8. Die cut a 4″ wide panel of the painted paper with the Pop up die and adhere to the inside of the card
  9. Stamp Build a Bouquet pieces on white paper with black ink and color with markers
  10. Die cut the pieces out and adhere to the die cut pieces as shown

CRS5074_SSC1214_DCS5074_DCP1001_2_front_KR_800

Build a Bouquet Pop Up Card by Asia King

Supplies:DCS5074_S5074_DCP1001_CRH313_AK_800

From Stampendous:
CRS5074 Cling Build a Bouquet Set
DCS5074 Build a Bouquet Die Set
H313 Penned Anniversary
DCP1001 Build a Pop Up Die Set
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®, papers Authentique Harmony ‘Creation’, ribbon (May Arts), white vellum

Scrapbook Adhesives by 3L®: Adhesive Sheets 6×12″, MyStik® Permanent Strips, Thin 3D Foam Squares – Mix White

Inks: Imagive Crafts/Tsukineko® StazOn Mini Ganache, Brilliance Pearlescent Olive, Tea Dye Distress Ink

STAEDTLER® ergosoft® aquarell watercolour pencils, Spellbinders Nestabilities Labels 18 dies

Instructions:

  1. Following instructions from the DCP1001 Build a Pop Up Die Set prepare a base for the pop up card from Authentique papers and add decorative borders using edge dies from the set. Mat over pink cardstock with MyStik® Permanent Strips.
  2. Stamp the vase and flowers from Cling Build a Bouquet Set with Ganache ink onto papers with a plain design and colour in with watercolour pencils.
  3. Die cut the images using Build a Bouquet Die Set and adhere to the pop up tabs.
  4. Die cut one label shape from coordinated paper and add some inking while the shape is still in the die. Stamp Penned Anniversary with Olive ink.
  5. Die cut another label (one size up) from white vellum and adhere to the card base.
  6. Adhere the sentiment panel with Thin 3D Foam Squares over the vellum.
  7. Tie a small bow from a decorative ribbon and crinkle it with a heat tool. Adhere to the card.