Archive for Halloween

PenPattern Bat by Amy Hurley-Purdie

Supplies:N259_N260_R206_SSC1208_AHP_800

From Stampendous:
N259 PenPattern Bat
N260 Bat Doodle
R206 Damask Bats
SSC1208 Tricky Words Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Plus:
Cardstock by Bazzill Basics®
Black Glitter Cardstock
Circle Die
Foam Tape
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Start with 6×6 orange card. Glue 5 ¾” x 5 ¾” green cardstock centered on orange. Glue 5 ½” x 5 ½” black glitter cardstock centered on green.
  2. Cut 2 ¼” x 4 ¾” magenta cardstock, stamp with Damask Bats. Mat on 2 ½” x 5” purple cardstock, and glue to card as shown.
  3. Glue orange and black ribbon across card. Cut 3 ¼” x 4” orange cardstock. Cut 3” x 3 ¾” black glitter cardstock. Using 3” circle cutting die, cut circle from right side of black glitter cardstock. Glue to card as shown.
  4. Using 2 ¾” circle cutting die, cut circle from purple cardstock. Using 2 ½” circle cutting die, cut circle from magenta cardstock and glue onto purple circle. Stamp small bat from Tricky Words stamp in magenta circle. Foam tape inside black glitter paper as shown.
  5. Stamp Doodle Bat, and Pen Pattern Bat on green, and orange cardstock. Cut out green bats, and use exacto knife to remove eyes. Cut out bats heads from orange and glue to backside of green bat. Curl wings, and glue bodies to card front as shown.
  6. Stamp “Fright Night!!!” to white cardstock strip and foam tape to card.

Raven Background by Kristine Reynolds

Supplies:Raven Background by Kristine Reynolds

From Stampendous:

R152 Raven Background Stamp
DP111 Black Detail Embossing Powder
VM001 VersaMark™ Watermark Ink Pad by Tsukineko®

Plus:

Black and white cardstock
Purple, Orange and Olive Distress inks by Ranger
Makeup Sponge or Ink Blender
Adhesive black rhinestone design by Recollections
Embossing Heat tool

Instructions:

  1. Emboss Raven Background in VersaMark in and Detail Black Powder on a white panel of cardstock.
  2. Use various inks to blend color all around the embossed design.
  3. Tear edges of paper by holding main image in left hand and grasping edges with the right hand then pulling towards yourself with the right hand. Your left thumb can dictate the depth and direction of the tear.
  4. Blend additional ink into exposed edges.
  5. Adhere stamped panel to a folded 8-1/2″ X 5-1/2″ card base of black cardstock
  6. Add self adhesive rhinestone trim as shown so that raven looks like he’s standing on it.

Raven Background by Debi Hammons

Supplies:R152_DH_800

From Stampendous:

R152 Raven Background Stamp
DP111 Detail Black Embossing Powder
VM001 VersaMark ink by Tsukineko

Plus:

Zip Dry™ paper glue by Beacon®
Cajun and Curry Spice cardstock by Bazzill
Black cardstock
1 Black Button
Twine by May Arts
Zots clear adhesive dots by ThemOWeb
Embossing Heat Tool

Instructions:

  1. Fold 11” x 4 ¼” Cajun cardstock in half to form the card base.
  2. Stamp Raven on 3 ¾” x 5” Curry Spice cardstock with VersaMark ink.
  3. Pour Black detail embossing powder over stamped image, tap off excess powder and return to jar.
  4. Heat with embossing heat tool until shiny and set.
  5. Glue to 5 ¼” x 4” black cardstock.
  6. Glue to card front.
  7. Wrap twine around top of card twice and knot on the right side, put the ends of the twine through button holes and knot again.
  8. Adhere button to card with adhesive dot.

Scraggly Cat by Debi Hammons

Supplies:Scraggly Cat by Debi Hammons

From Stampendous:
M314 Scraggly Cat Stamp
SSC1208 Tricky Words Perfectly Clear Stamps™ Set
MGK01 Fall Micro Glitter Kit
STF082 VersaFine™ Onyx Black ink Pad by Tsukineko®
VM001 VersaMark™ Watermark Ink Pad by Tsukineko®

Plus:
Parakeet and Majestic Purple Dark
Cardstock by Bazzill® Basics
White cardstock
Zip Dry™ Paper Glue by Beacon® Adhesives
Zig™ 2-way Glue Pen by EK Success®
Colored pencils by PrismaColor®
3D Foam Squares by Scrapbook Adhesives™ by 3L®

Instructions:

1. Fold 11″ x 4-1/4″ Parakeet cardstock in half to form card base.
2. Stamp Candy from the Tricky Words Clear Set all over the card front with VersaMark Ink.
3. Stamp the Scraggly Cat on 3-1/2″ x 2-1/2″ white cardstock with black ink.
4. Color as desired.
5. Glue to 3-3/4″ x 2-3/4″ purple cardstock.
6. Stamp Candy across 4-1/4″ x 1-1/8″ white cardstock with black ink.
7. Color as desired.
8. Glue to 4-1/4″ x 1-3/8″ purple cardstock.
9. Glue to the bottom of the card front.
10. Adhere cat to the card front with dimensional adhesives.

Mr. Skulleton by Debi Hammons

Supplies:M315_R207_H309_DH_800

From Stampendous:
M315 Mr. Skulleton Stamp
R207 Skull Stack Stamp
H309 Halloween Wish Stamp
MGK01 Fall Micro Glitter Kit
STF082 VersaFine™ Onyx Black Ink Pad by Tsukineko®

Plus:
Parakeet and Black Cardstock by Bazzill
White cardstock
Zig™ 2-way Glue Pen by EK Success®
Zip Dry™ Paper Glue by Beacon® Adhesives
Colored pencils by PrismaColor®
3D Foam Squares by Scrapbook Adhesives™ by 3L®
Oval Nestabilities™ Dies by Spellbinders®

Instructions:

1. Fold 11″ x 4 1/4″ Parakeet cardstock in half to form card base.
2. Stamp Skull Stack on 3 3/4″ x 5″ parakeet cardstock with black ink.
3. Glue to 4″ x 5 1/4″ black cardstock.
4. Glue to the card front.
5. Stamp Halloween Wish on 2 3/8″x 1 5/8″white cardstock with black ink.
6. Glue to 2 5/8″ x 1 7/8″ black cardstock.
7. Glue to the bottom left of the card front.
8. Stamp Mr Skulleton on white cardstock with black ink.
9. Color as desired.
10. Die cut with an oval die.
11. Glue to a slightly larger black oval .
12. Color as desired .
13. Adhere to card front.
14. Add glitter to the hat and eye patch with glue pen.