Archive for kitty

Eclectic Charms Kitty Necklace by Debbie Cole

Supplies:SSC1217_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
FRG13C Royal Blue Glass Glitter
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Americana® Baby Blue, Hauser Light Green, Lamp Black, Raw Sienna, Snow white, and True Ochre Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Matte Medium by DecoArt®
Medium Rectangle Bezel by Art Mechanique
Two Part Resin by ICE Resin
Cosmetic Sponges
Bubble Palette
Paper Palette
Paper Towel
All Purpose Glue
Chain Necklace
Jump Rings
Rhinestones
Beads
Craft Sticks
Disposable Measuring Cups

Instructions:

  1. The stamping and painting will need to be done twice since this necklace is completed with the layered technique. Basecoat the paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Place the cat stamp from the collection onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark. Repeat this process and stamp the cat a second time.
  1. Using a bubble palette, place about a dime size drop of True Ochre and Baby Blue into individual bubble. Create a mixture of three parts water and one part Easy Float. Mix one part paint with three parts water or enough water to make the paint transparent. Completely mix the paint in the bubble palette so there is no solid pigment. Using a #3 round wash in the cat with True Ochre and the background with Baby Blue. Wash in the second cat. Float to shade the second cat with True Ochre, then Raw Sienna. Fill in the iris of the eyes with Hauser Light Green. Allow to dry and coat both sides of the paper with matte medium.
  1. When dry, cut the first cat to fit into the bezel. If you have the die, you can run it through your machine. Manually cut out the cat from second image. Coat these images again with matte medium. Allow o dry and glue the first image to the bottom of the bezel. Allow glue to dry.
  1. Mix Ice Resin according to manufacturer’s instruction and pour it in to fill half of the bezel. Sprinkle a little blue glitter in the blue sections of the image. Allow to harden overnight. Glue the second cat into position. Mix a small amount of Ice resin again. Pour just enough to cover the cat. Allow to dry overnight. glue rhitstones into place and add some more glitter. Mix additional Ice Resin and fill the bezel. Allow to harden. Add charms, beads, and chain of choice using jump rings.

 

Eclectic Charms Kitty Keychain by Kristine Reynolds

Supplies:SSC1217_KR_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
FRG02C Champagne Glass Glitter
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:

Spellbinders Media Mixage’ Rectangle One bezel
Copic Markers (YR20-YR21-YR23-YR24-Y02-E31-E33)
Spellbinders Media Mixage’ Rectangle One die
7 gypsies hardware
Enviro Tex lite Resin
Scotch Quick-Dry Adhesive

Instructions:

  1. Die cut rectangle shape out of white cardstock
  2. Stamp kitty image on die cut panel with black ink and color with copic markers
  3. Glue panel into bezel and cover image with glue to seal
  4. Add Champagne Glass Glitter and allow to dry
  5. Add resin
  6. Attach hardware to complete

 

House-Mouse® Share a Sip Pop Up Card by Pam Hornschu

Supplies:HMP28_HMV15_HGRP06_inside_PH_800

From Stampendous:
HMP28 Share a Sip
HMV15 Cheesy Gift
HGRP06 Stacked Gifts
CRR217 Cling Floral Tapestry
CRP243 Cling Feline Curious
DCS5072 Hummingbird Dies
CRS5072 Hummingbird Cling Stamps
DCP1001 Die Cut Pop Ups
SSC1216 Beary Mice Perfectly Clear™ Stamps
EP100 White Embossing Powder
EP050 Crystal Embossing Powder
VM001 Versamark from Tsukineko
VP001 Veresamark Pen from Tsukineko
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo, SSH34 Medium Perfectly Clear™ Acrylic Handles

 

Plus:
Authentique Latest and Greatest 6” square pad
Pale yellow and blue cardstock from Bazzill Basics®
Copic Markers
Zip Dry from Beacon Adhesives
Silk ribbon from May Arts
Foam tape from 3M

Instructions:

  1. Cut and top-fold yellow cardstock to create 6” square card.
  2. Cut one blue cardstock panel 5 ¾” square. Stamp floral tapestry image in VersaMark ink and emboss in white to cover panel. Use Pop Up Dies to cut decorative edge. Adhere to front of card.
  3. Adhere strip of dotted paper along front of card. Stamp sentiment in black ink.
  4. On second strip of dotted paper, stamp packages portion of Gruffy image. Color and shade with Copics and adhere. “Fishtail” cut the end, and adhere to card.
  5. Stamp Cheesy Gift image on white cardstock. Color with Copics and cut out. Use VersaMark pen to ink over the ribbon and emboss with Crystal powder. Adhere to card front.
  6. Cut blue panel to 4 ¼” X 11”. Stamp floral with Versamark and embosss in white.
  7. Place Pop Up Die on panel with fold-line of die on the 6” mark. Run through machine to cut pop up sections. Use edge dies on the ends. Press and smooth folds.
  8. Use deep “V” edge die to cut ends of 4 ¼” X 5” panel of striped paper. Fold to match pop up panel, and adhere over the top, clipping where necessary to not block the pop up base.
  9. Adhere panel of dotted paper, die cut edged, over the two side pop ups to prevent them from showing.
  10. Stamp Feline Curious on the left inside of card. Color with markers.
  11. Adhere pop up panel to inside of card.
  12. Stamp, color, and die cut one large and one small hummingbird. Cover with Versamark ink and emboss with Crystal powder.
  13. Die cut two rectangle and one oval frames from Pop Up Dies set from blue and striped paper. Stamp sentiment in black ink. Layer and adhere all to card using foam tape.
  14. Adhere hummingbirds as shown.
  15. Stamp focal image in black ink on white cardstock. Color and shade with Copics. Cut out, leaving straight base. Using Versamark Pen, ink and emboss in crystal as desired over image. Adhere to base pop up on card.
  16. Adhere ribbon bow inside.

HMP28_HMV15_HGRP06_front_PH_800

Feline Sleepy by Jamie Martin

Supplies:Q207_SSC1213_SSC1215_JM_800

From Stampendous:
Q207 Feline Sleepy
SSC1213 Life Words Perfectly Clear™ Stamps
SSC1215 Lacy Ovals Perfectly Clear™ Stamps
AC672HSS Dot Sparklers Silver Holograph w/ Gold
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazill Basics Paper®
Patterned Paper
Brown Ink
Prismacolor® Colored Pencils
Chalk
Corner Punch
Ribbon
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Stamp Sleepy Feline with black ink and color with pencils. Chalk around cat with blue.
  2. Stamp sentiment with brown ink, glue ribbon to the bottom and layer onto dark blue paper, set aside.
  3. Stamp Lacy Ovals on kraft paper with brown ink, use corner punch, layer onto light and dark blue papers.
  4. Add Dot Sparklers to corners, set aside.
  5. Stamp Lacy Ovals on kraft card in brown and layer with decorative and brown paper.
  6. Mount pieces as shown.

Feline Sleepy Thank You by Jennie Lin Black

Supplies:Q207_SSC1214_JLB_800

From Stampendous:
Q207 Feline Sleepy
SSC1214 Happy Greetings Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
White Cardstock
Patterned Paper
Copic Markers: Kitty: YR30, YR31, YR21, YR24, YR27, E35  Nose: W3, W1  Ears: R20 Ground: W1, W3  White part of face softened with Blender  Background YR30
Flowers from Prima
Zip Dry™ Paper Glue by Beacon Adhesives