Archive for ocean

Clipper Ship by Kristine Reynolds

Supplies:DWLG763_SSC1213_kr_800

Stampendous:
SSC1213 Life Words Perfectly Clear™ Stamps
SSH38 Small Perfectly Clear™ Acrylic Handle
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Dreamweaver:
DWLG763 Clipper Ship Stencil
DWDMBP Black Matte Embossing Paste
Metalic FX Mica Powders
DWLL332 Picasso Shield

Plus:
Cardstock by Bazzill Basics Paper®
White Shiva Artist’s Paintstik® by Jack Richeson & Co., Inc.
Black Adhesive Dots by Recollections®
Palette Stamp and Glue Pad
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Create clouds on a blue panel of cardstock using the Picasso and white artist stick.
  2. Use removable tape to secure the Clipper Ship to the panel and emboss with black embossing paste and set aside to dry.
  3. When dry lay stencil back over the dried stencil and use a sponge dauber to cover the image with glue from the glue pad.
  4. Brush mica powders on to the image.
  5. Stamp sentiment on the panel.
  6. Back panel with a black panel and then a larger lavender panel.
  7. Create a card base by folding a 8 1/2″ x 5 1/2″ blue panel in half.
  8. Adhere image panel to card.
  9. Adhere  black dots to card.

Clipper Ship Thank You by Kristine Reynolds

Supplies:

Stampendous:
SSC1199DWLG763_SSC1199_kr_800 Loving Messages Perfectly Clear™ Stamps
SSH34 Medium Perfectly Clear™ Acrylic Handle
MPW811 White Paper
FX71 Sticky Panels
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
MG10 Micro Glitter-Teal
MG09 Micro Glitter-China Blue
MG14 Micro Glitter-Ice Blue
MG17 Micro Glitter-Cinnamon
GX225F Multi Fine Glitter

Dreamweaver:
DWLG763 Clipper Ship Stencil
LG838 Waves Stencil
DWDPK Dreamweaver Palette Knife
DWLM2010 Dreamweaver Palette Spreader

Plus:
Cardstock by Bazzill Basics Paper®
Ultramarine Blue Acrylic Paint by DecoArt®
Classic Circle & Classic Scallop Circle Dies by Spellbinders™ Paper Arts
Coconut Oil Soap
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Use Palette Knife to mix paint with embossing paste to create blue paste.
  2. Use removable tape to adhere Waves Stencil on a dark blue panel and spread blue paste across the stencil using palette spreader and set aside to dry.
  3. When dry, adhere panel to a dark blue panel.
  4. Create a light blue card base by folding an 8 1/2″ x 5 1/2″ panel in half.
  5. Adhere wave panel to the bottom of the card.
  6. Adhere a sticky panel to white cardstock and die cut with a circle die.
  7. Rub soap on the back of the Clipper Ship stencil.
  8. Adhere the Clipper Ship stencil to a white die cut circle panel.
  9. Sprinkle the various color micro glitters into the stencil.
  10. Carefully remove paper from stencil.
  11. Cover the rest of the panel with Multi Fine glitter.
  12. Back panel with a teal sallop edge circle panel and the adhere to card.
  13. Create sentiment panel and adhere to card.

Wind in Sails by Jennie Lin Black

Supplies:P261_L260_JLB_800

Stampendous:
P261 Wind in Sails
L260 Relax Enjoy
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Plus:
Cardstock by Core’dinations®
Patterned Paper by Graphic 45
Green Burlap
Button
3D Foam Squares by Scrapbook Adhesives® by 3L®
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Stamp image onto quality white cardstock (see suggestion above).
  2. Color your image using your favorite coloring medium such as Copics, Watercolor pencils, water based markers, chalk or other. Do not feel as if you need to use the coloring medium as the colorist used in the sample.
  3. Layer and assemble card.

Seashell Jar by Asia King

Supplies:W144_L263_ASCRS03_MPW811_FREG029_FRC05_FREG030_EP211_AK_800

Stampendous:
W144 Seashell Jar
L263 Near the Sea
ASCRS03 Cling Industrial Set
FREG029 Shabby Blue Embossing Enamel
FREG030 Aged Ivory Embossing Enamel
EP211 Golden Sand Embossing Powder
DCP1001 Pop Up Die Set
FRC05 Taupe Color Fragments
SSH57 Jumbo Perfectly Clear™ Acrylic Handle
MPW811 Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Plus:
Cardstock by Bazzill Basics Paper®
Tim Holtz® Evergreen &  Tea Dye Distress Ink by Ranger®
Spectrum Noir™ Markers
Labels One Dies by Spellbinders™ Paper Arts
Ribbon by May Arts
E-Z Runner® Permanent Strips by Scrapbook Adhesives by 3L®
4×6″ Adhesive Sheets by Scrapbook Adhesives by 3L®
White 3D Foam Squares by Scrapbook Adhesives by 3L®
Glossy Accents
Burlap Panel
Charms
Decorative Pins
Liquid Pearls
Adhesive Pearls

Instructions:

  1. Create a 6×6″ card blank from turquoise cardstock
  2. Using scraps of white card repeatedly stamp crackle pattern from the Industrial set with Evergreen ink. Cut the cards into strips of varying width and ink up the edges.
  3. Arrange the strips to resemble wood planks and adhere to the card leaving a 1/16″ border (as shown). Add a piece of burlap positioning it diagonally.
  4. Stamp the Sea Shell Jar in black onto Mixed Media paper and color in (I used Spectrum Noir markers).
  5. Using encrusted jewel technique melt in Shabby Blue, Aged Ivory, Golden Sand and Taupe Color Fragments into the background.
  6. Die cut your stamped panel with Labels One die and adhere to a mat 1/16″ bigger than the stamped panel (use the die as a template for fussy cutting).
  7. Cover the jar with Glossy Accents and allow to dry fully. Adhere the panel to the card over 3D Foam Squares.
  8. Stamp the Near The Sea sentiment onto white card and die cut using a bezel/label die from the Pop Up Die Set. Ink the edges.
  9. Finish the card with a ribbon bow, pearls, charms and decorative pins.

Wind in Sails Near the Sea by Asia King

Supplies:P261_L263_FREG027_AK_800

Stampendous:
P261 Wind in Sails
L263 Near the Sea
FREG030 Aged Ivory Embossing Enamel
EI101 Boss Gloss Embossing Ink

Plus:
Cardstock by Bazzill Basics Paper®
Patterned Paper by Vintage Experience
Patterned Paper by The Works
Watercolor Paper by Strathmore®
StazOn Gothic Purple Mini Ink by Tsukineko®
Tim Holtz® Frayed Burlap Distress Ink by Ranger®
Coffee Archival Ink™ by Ranger®
4″x6″ Adhesive Sheets by Scrapbook Adhesives® by 3L®
MyStik® Permanent Strips by Scrapbook Adhesives® by 3L®
3D Foam Squares – White by Scrapbook Adhesives® by 3L®
3D Foam Pennants by Scrapbook Adhesives® by 3L®
DODZ™ – 3D by Scrapbook Adhesives® by 3L®
Inktense Pencils by Derwent
Pink, Blue, & Ivory Suede Twine by May Arts
Lacey Pennants Die by Spellbinders™ Paper Arts
Labels 18 Die by Spellbinders™ Paper Arts
Metal Ornate Corners
Burlap & Canvas Flower
Self Adhesive Pearls
Eyelets
Decorative Pins
Brads

Instructions:

  1. Create a kraft card blank with A5 card front.
  2. Using pink cardstock prepare a mat 1/16 inch on each side smaller than the card front. Adhere to the base with MyStik®.
  3. Trim a panel from patterned paper 1/16 inch on each side smaller than the mat. Ink the edges and adhere to the base with MyStik®.
  4. Dab embossing ink onto metal corners with Boss Gloss and sprinkle with Aged Ivory Enamel. Shake off the excess and heat emboss.
  5. Adhere the corners to the card with Adhesive Sheets in the top and bottom right corners as shown.
  6. Die cut a large Lacey Pennant from coordinated papers and adhere to the card, allowing the top left corner to hang off the card.
  7. Create a centre panel from patterned papers, pink and beige cardstock (use the photo for approximate proportions) and adhere to the card using 3D Foam Squares. Add pearls along the right side as shown.
  8. Stamp Wind In Sails onto watercolour paper with Coffee Ink and colour with Inktense pencils. Die cut and emboss with Labels 18 die. Adhere to the card with 3D Foam Squares.
  9. Stamp Near The Sea sentiment on a scrap of kraft card in purple ink. Trim and form in your hands to create a small wavy banner. Adhere to the card.
  10. Cover the 3D Foam Pennants with matching papers, add eyelets and suede twine and layer at the top of the card as shown.
  11. Finish the card with a canvas flower and suede twine bows adhered with DODZ™ – 3D. Add final touches with brads and decorative pins.