Archive for ornament

House-Mouse® Balance Act by Kristine Reynolds

House-Mouse® Balance Act by Kristine ReynoldsSupplies:

From Stampendous:
HMV09 House-Mouse® Balance Act
SSC1209 Holiday Words Perfectly Clear™ Stamps
SSH34 Medium Perfectly Clear™ Acrylic Handle
EJS01 Spoonful of Silver
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Plus:
Cardstock by Bazill Basics Paper®
Patterned Paper by The Paper Studio®
Copic® Markers (R22-R24-E42-E43-G61-G63-E21-E23-E25-E50-E51-E93-C1)
Zip Dry™ Paper Glue by Beacon Adhesives
Heat Tool

Instructions:

  1. Adhere paper panels to a light green cardstock panel
  2. Tie ribbon around panel and then adhere to dark green card base
  3. Stamp Balance Act image on a white panel with black ink and color with markers
  4. Back panel with a slightly larger red panel and adhere to card
  5. Stamp sentiment on the card with black ink
  6. Sprinkle Spoonful of Silver on card and heat until melted

Deck the Halls by Debi Hammons

Supplies:Deck the Halls by Debi Hammons

From Stampendous:
HMR07 House-Mouse Designs® Deck the Halls
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH57 Perfectly Clear Stamp Handle

Plus:
Cardstock by Bazzill Basics®
Pattern Paper
Markers by Copic®
Twine by May Arts Ribbon®
Zip-Dry™ Glue by Beacon Adhesives®
Button

Instructions:

  1. Make a top folding card base with a 5 1/2 x 8 1/2 inch cardstock, so the finish dimensions are 5 1/2 x 4 1/4 inches.
  2. On white cardstock stamp Deck the Halls with black ink and color.
  3. On card base glue pattern paper to bottom and also glue gold strip of cardstock across the middle of the card base.
  4. Glue colored image onto card base.
  5. Tie button with twine and glue to card.

Country Snowman Ornament by Debbie Cole

M318_snowflake_ornament_DC_800Supplies:

From Stampendous:
M318 Country Snowman
EJK08 White Frantage Encrusted Jewel Kit
GX230M Multi Crystal Medium Glitter
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Americana® Country Red, Deep Burgundy, Forest Green, Lamp Black, Marigold, Mistletoe, Traditional Burnt Umber, Traditional Raw Sienna, Turquoise Blue, White Wash, & Whispering Turquoise Acrylic Paint by DecoArt®
Multi-Purpose Sealer by DecoArt®
Easy Float by DecoArt®
DuraClear Matte Varnish by DecoArt®
Paintbrushes
Box by Viking WoodCrafts
Cosmetic Sponge Wedges
Paper Palette
Bubble Palette
Sanding Disc
Paper Towels
All Purpose Glue
Clear Ruler

Instructions:

  1. Prepare the surface with sealer, sand, then wipe with dampened cheese cloth. Note, it is important that there is not any areas with high wood grain. Sand until smooth. Basecoat entire surface with White Wash. Apply multiple coats until smooth and even. Apply a coat of matte varnish. This will protect the work you have already done plus allow for easy clean-up for the next step.
  2. Determine placement of stamp referring to the photo. Place stamp onto acrylic handles. Dampen sponge and remove as much water as possible. Load with Lamp Black. When using paint on stamps it is important that you do not overload the image. Pour a puddle of paint out on the palette. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Now quickly pounce the loaded sponge over the entire image and stamp it on the surface. If you don’t like what you have stamped simply wipe it off with a wet wipe! Since you already have a coat of varnish on the surface, it will clean up easily. Basecoat around the stamped areas with turquoise Blue.
  3.  Using a bubble palette, place about a dime size drop of Marigold, Country Red, Raw Sienna, and Mistletoe in individual bubbles. Mix one part paint with appx three parts water mixed with Easy Float. Completely mix the paint until it becomes transparent. Using a flat shader brush or #3 round wash in all the colors referring to the photo for placement.
  4.  Shade each color with full strength paint using a flat brush including the squares. Apply a second shade golden areas with Traditional Raw Sienna, red areas with Deep Burgundy, brown areas with Traditional Burnt Umber, and green areas with Forest Green.
  5.  Drybrush the outer edge of the snowflake with Whispering Turquoise, reinforce with White Wash. Add glue to the edges and sprinkle with glitter.
  6.  Allow to cure for 24 hours. Apply multiple coats of matte varnish to protect the tote.

 

House-Mouse® Christmas Story by Debi Hammons

Supplies:HMR15_and_envelope_DH_800

From Stampendous

HMR15 Christmas Story Stamp
GX220U Ultrafine Crystal Glitter
STF082 VersaFine Onyx Black Ink Pad by Tsukineko

Plus
White, Kraft and Red card stock
Zip Dry paper Glue by Beacon Adhesives
Colored Pencils by PrismaColor
Glue pen by Zig
String of Christmas Lights by Darice

Instructions:

  1. Fold 8-1/2” x 5-1/2” Kraft card stock in half to form card base
  2. Stamp the Christmas Story on 5” x 3-3/4” white card stock
  3. Color as desired
  4. Glue to 5-1/4” x 4” Red card stock
  5. Glue to the card front
  6. Glue a string of about 5 Christmas lights along the top of the card front
  7. Add glitter to the light bulbs on the image with the glue pen

Bundle Penguins Ornament by Debi Hammons

Supplies Q206_Bundled_Penguins_Ornament_DH_800

From Stampendous:
Q206 Bundle Penguins Wood Stamp by Stampendous
EJK06 Encrusted Jewel Teal kit by Stampendous
VersaFine Black Onyx ink by Tsukineko

Plus:
Zip Dry Paper glue by Beacon Adhesives
Colored Pencils by PrismaColor
Kraft card stock
Paper Star SKU#260878

Instructions

  1. Trace Star onto kraft card stock with a pencil
  2. Cut out the star inside the lines
  3. Stamp the Penguins on the star with black ink
  4. Color as desired
  5. Glue the Kraft star to the Star Ornament
  6. Apply glue to the sides of the star
  7. Pour on the Teal Color flakes from the kit and push them into the glue
  8. Keep applying until it’s all covered