Archive for paper crafts

Cattus Librum by Jennifer Dove

Supplies: V239_SSC1117_JD_800

From Stampendous:

CRV239 Jumbo Cling Rubber Cattus Librum
FREG025 Aged Copper Embossing Enamel
FRM04 Tea Stained Mica Fragments
SSC1117 Sincere Sentiments Perfectly Clear™ Stamps
SSH34 Medium Rectangle Acrylics Handle
GS400 Spray Bottle (4-oz.)

Plus:

Copic Markers
Instant Coffee Solution
American Crafts Ribbon
Cork Paper
Bazzill card stock: Tawney, Medium
Fabric Glue
heat tool

Instructions:

1.Stamp Kitty image on white cardstock with black ink. Trim to create rectangle.
2.Emboss image with Deep Impression Embossing Powder.
3. Stamp message on Cream paper and spritz with coffee.
4. Spritz background paper with coffee.
5. Encrust areas on card with Teas Stained Mica and Aged Copper Embossing Enamel.
6. Mount on brown cardstock, layering cork paper, encrusting and curled papers.
7. Twist brown ribbon around card and adhere in several places with Fabric glue.
8. Mount Kitty on top of Encrusted area at an angle with foam adhesive.
9. Mount piece onto folded A2 sized cardstock

Cattus Librum Frame by Fran Seiford

Supplies: V239_CRS5009_FS_800

From Stampendous:

CRV239 Jumbo Rubber Cling Cattus Librum
FREG026 Aged Black Embossing Enamel
FREG023 Aged Silver Embossing Enamel
FREG024 Aged Gold Embossing Enamel
FREG025 Aged Copper Embossing Enamel
VM001 VersaMark™ Watermark Stamp Pad
SSH46 Large Rectangle Acrylic Handle

Plus:

Bazzill Basics Cardstock- Java (fits into 5×7 frame)
cream cardstock
Clear Laquer Varnish
Acrylic paints: Burnt Umber and Tangerine
heat tool
Creative Imaginations Sheer Brown 1 1/2

Instructions:

1. Using VersaMark Ink Pad, stamp swirl image on surface of frame, wrapping around the wood as you come to the edge. (for this step, you do not need to mount your cling stamp on a block).
2. Sprinkle Aged Silver Embossing Enamel onto stamped area and heat to set. Repeat this all over frame, until well covered with the design. Seal with clear laquer when done.
3. Stamp Kitty on cream paper with VersaFine Ink and set aside.
4. Stamp swirl again in a pleasing pattern on the Java cardstock, and emboss with several different colors of powder for a varied look.
5. Dribble both paint colors together over embossed designs and scrub in with the paintbrush mixing and covering the area as you go.
6. Scrub over embossed sections with a rough rag or paper towel intil the embossed colors are revealed.
7. when that is dry, you can rub in chalk colors with you finger if desired.
8. Mount Kitty image on top of the background you’ve just painted when it is dry, and then, insert tyhat into the frame.
9. Affix the ribbon between the picture backing and the painted mat, and tie a bow for hanging at the top.
10. Clean your glass with glass cleaner.
Watch Fran’s video on making this project @ www.youtube.com/stampendous

 

Skateboard Kiddo by Kristine Reynolds

Supplies: M278_SSC1115_KR_800

From Stampendous:

M278 Skateboard Kiddo
SSC1115 Birthday Assortment Perfectly Clear™ Stamps
VM001 VersaMark™ Watermark Stamp Pad
EP111 Midnight Black Embossing Powder
SSH46 Large Rectangle Acrylic Handle

Plus:

Cling Skateboard Kiddo
Paper: Bazzill Basic Card Stock, Mohawk smooth white
Ink: Memento Tuxedo Black, Spectrum Noir Markers
May Arts Ribbon
Martha Stewart Star Border Punch

Instructions:

1. Create card by folding an 4 1/2 inches x 8 1/2 inches rust panel in half.
2. punch the long edge of a 5 1/4 inches x 3 inches teal panel with the star border punch.
3. adhere punched panel to the bottom of the card.
4. Tie polka dot ribbon around card.
5.  Stamp sentiment in the top left corner of the card. with VersaMark ink and emboss with black EP.
6.  Stamp Kiddo on a white rectangle panel.
7. Color image with alcohol markers.
8.  Adhere image panel to card at an angle.

Peacock Feather by Melinda Gleissner

Supplies: R105_N030_K028_M265_P157_MG_800

From Stampendous:

N030 Peacock Feather
R105 Dream Text
P157 Large Tag
K028 Just a Note
M265 Small Tag

Plus:

Archival Jet Black Ink by Ranger
Pumice Stone Distress Ink by Ranger
Memento London Fog Dye Ink by Tsukineko
VersaMark Watermark Ink by Tsukineko
The Jeweled Colored Cardstock Stack by DCWV
White Cardstock by The Paper Company
Colors Favorite Findings Buttons by Blumenthal Lansing
Twine
Permanent E-Z Runner Tape by Scrapbook Adhesives by 3L

Instructions:

  1. Create a card base from 4-1/4” x 11” piece of blue cardstock.
  2. Cut a 4” x 5-1/4” panel from green cardstock; Adhere to card base.
  3. Cut a 3-3/4” x 5” panel from white cardstock; Stamp Dream Text on white panel using London Fog ink; Ink edges with Pumice Stone ink.
  4. Stamp sentiment on white panel using Jet Black ink; Adhere to card base.
  5. Stamp both tag images on scrap of white paper using Jet Black ink; Stamp over tag images with Dream Text using London Fog ink.
  6. Trim tags; Ink edges with Pumice Stone ink.
  7. When dry, stamp Peacock Feather image onto tags, using VersaMark; Sprinkle with embossing powder; Heat to melt.
  8. Adhere tags to card base; Add button with twine.

 

Rose Corset by Pam Hornschu

Supplies: Rose Corset by Pam Hornschu

From Stampendous:

P146 Rose Corset

Plus:

Rich Cocoa Memento ink
Bazzill Baby Pink Light cardstock
My Minds Eye patterned paper
May Arts and Creative Impressions ribbons and trims
paper rose, pearl stickers, hat pin, tulle
sewing machine, brown thread
double-sided foam adhesive
Embossing Heat Tool

Instructions:

1.   Cut and fold pink cardstock to create 5 ½” square card, top folding.
2.   Stamp sentiment at top right corner of card using brown ink. Ink around edges of card.
3.   Adhere rows of various ribbons and trims to card. Zig zag stitch around edges with sewing machine and brown thread.
4.   Stamp Rose Corset on pink cardstock and patterned paper with Versamark ink and emboss with Vintage Mahogany Tinsel powder. Cut out entire image on pink cardstock, and corset only from patterned paper. Apply tiny pearl stickers to corset.
5.   Sponge ink around edges. Adhere patterned corset over cut out image.
6.   Ink tulle with brown ink, twist and adhere to card. Wrap ribbon with bow around image, and adhere to card with double-sided foam adhesive. Adhere rose, insert hat pin (cover with VM ink and emboss with tinsel EP first) through back of image, taking card to ensure that pin point is tucked under layers.