Archive for pendant

Eclectic Charms Floral Necklace by Debbie Cole

Supplies:SSC1217_3_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
NKCRS05 Kaffee Klatsh Set
FRG16C Fuchsia Glass Glitter
FRG10C Shaved Ice
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Baby Pink, Sapphire, Sea Aqua, Turquoise, Wild Orchid Acrylic Paint by DecoArt®
Dazzling Metallics Shimmering Silver Acrylic Paint by DecoArt®
Media Fluid Acrylics Interference by DecoArt®
Matte Medium by DecoArt®
Jewelry Component by Industrial Chic®
Two Part Resin by ICE Resin
White Polymer Clay
Clay Circle Cutters
Paper
Patterned Paper
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
X-Acto Knife
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Begin by kneading the clay so that it is soft and workable. Roll it into a ball and roll the clay out using a rolling pin or acrylic roller to 1/8 inch depth. Spray the round rubber stamp of your choice from the set with a light mist of water and press firmly into the clay. Lift the stamp off the clay. Repeat two more times Cut out the main circle with appx 1 3/4 inch shape cutter. Cut out the center with a 1 inch shape cutter. Cut two more 1 inch circles form the other impressions. Poke holes into both sides 1 inch circles and insert eye hooks that have been trimmed to 1/2 inch.. Bake all the circles according to manufacturer’s instructions. Allow to cool.
  1. Paint over the clay randomly with- Baby Pink, Sapphire, Sea Aqua, Turquoise, Wild Orchid .Wipe off some of the paint using a paper towel to allow the undertones of the to show through. Allow to dry. Wash over all the circles with thinned Sappire allowing the paint to seek into the impressed areas. Allow to dry. Brush Interference Turquoise over all the circles. Allow to dry. Using your finger, wipe on Shimmering Silver to highlight.
  1. Stamp the bouquet twice onto paper. Colorize both with paint for the palette. Glue a piece of cardstock to the back of the circle to cover the hole. Fill the bottom of the hole with the embossing powder and heat set. The inside of the pendant is created using a layered technique. Begin by preparing the paper, sealing both sides with Decou-Page. Allow to dry. Repeat this step. Cut and glue background into place. Mix a small amount of Ice Resin following the manufacturer’s instructions. Pour just a small amount over the image and spread with a disposable paint brush. Allow to harden over night. Cut out lettering and apply brown color pencil around edges. Glue into place and add additional resin. Also use the resin as a varnish by brushing it over the clay. Allow to harden over night. To complete the necklace, combine the elements to form the necklace and attach with jump rings to the pendant.

 

Eclectic Charms Bird Necklace by Debbie Cole

Supplies:SSC1217_5_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
CP475 Creative Palette Rectangles
FRG16C Fuchsia Glass Glitter
FRG10C Shaved Ice
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Baby Blue, Baby Pink, Cadmium Yellow, Lamp Black, Snow white, and True Blue Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Matte Medium by DecoArt®
Rounde Silvertone 1/2″ Bezel
Two Part Resin by ICE Resin
Cosmetic Sponges
Bubble Palette
Paper Palette
All Purpose Glue
Chain Necklace
Rhinestone Chain
Jump Rings
Beads
Craft Sticks
Disposable Measuring Cups

Instructions:

  1. Using the small rectangle Creative Palette, place small drops of True Blue, Baby Blue, and Baby Pink on to the palette, roll with brayer and press paper into the palette. Allow to dry and cut a circle to fit the bezel. Coat with mate medium, allow o dry and glue into the bezel. Mix a small amount of Ice Resin following the instructions by the manufacturer and pour just enough to cover the bottom. Sprinkle in mica flakes and glitter. Allow to dry over night.
  1. The stamping and painting will need to be done twice since this necklace is completed with the layered technique. Basecoat the paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Place the stamp from the collection onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark. Repeat this process and stamp the cat a second time.
  1. Using a bubble palette, place about a dime size drop of Baby Pink, Cadmium Yellow, and Baby Blue into individual bubble. Create a mixture of three parts water and one part Easy Float. Mix one part paint with three parts water or enough water to make the paint transparent. Completely mix the paint in the bubble palette so there is no solid pigment. Using a #3 round wash in the blue areas of the bird with Baby Blue, the pink areas with Baby Pink, and the Cadmium Yellow to the beak and tips of flowers. Float to shade the second bird with True Blue and the breast with Baby Pink. Allow to dry and coat both sides of the paper with matte medium.
  1. When dry, cut the first bird and lowers to fit into the bezel. Cut out the second images of the bird and flowers individually. Coat these images again with matte medium. Allow to dry and glue the first image into the bezel. Sprinkle more mica chips and pour resin to cover all the elements. Allow to dry overnight.
  1. Glue the second bird and flowers into position. Mix a small amount of Ice resin again. Pour just enough to cover the images. Allow to dry overnight. Glue rhinestone chain around the perimeter of the bezel. Mix additional Ice Resin and fill the bezel. Allow to harden. Add charms, beads, and chain of choice using jump rings.

 

Eclectic Charms Steampunk Bird Necklace by Debbie Cole

Supplies:SSC1217_ASCRS02_2_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
ASCRS02 Steampunk Set
SAS03 Stack Art Royal Heart Kit
FRL03 Copper Lux Mix
MPW811 Mixed Media White Paper
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Fawn, Lamp Black, Raw Sienna Acrylic Paint by DecoArt®
Dazzling Metallics Shimmering Silver, Copper, Rich Espresso, Royal Ruby Acrylic Paint by DecoArt®
Matte Medium by DecoArt®
Two Part Resin by ICE Resin
Cosmetic Sponges
Watch Parts
Cogs
Bubble Palette
Paper Palette
All Purpose Glue
Chain Necklace
Jump Rings
Beads
Craft Sticks
Disposable Measuring Cups

Instructions:

  1. This necklace is completed with the layered technique. Basecoat the paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Place the text stamp from the kit onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Raw Sienna out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark. Wash over the entire area with transparent True Ochre. Allow to dry and stamp over this area with the Watch stamp using Raw Sienna. Cut to fit bezel. Coat with matte medium on both sides. Glue into the bottom of the bezel. Apply a small amount of glue in the two upper edges and bottom of the heart and add a small amount of Lux Mix. Mix the resin following the manufacturer’s instructions and pour to coat the image and glitter. Allow to harden overnight.
  2. Base coat small areas of a sheet of mixed media paper with Shimmering Silver and Royal Ruby. Stamp the Bird Gears once on the ruby section and once on the silver area with Lamp Black. Stamp the mechanical elements to the silver area. Cut out all images and apply one coat of matte medium to both sides of the images. Stamp the gears, the text Steampunk, and the bird with gears onto tracing paper with Lamp Black. Cut out as close as the edges as possible. Glue the silver mechanical elements to the right side of the heart, the cogs, and the images on tracing paper into position referring to the photo. Allow glue to dry and add a small amount of resin to cover these items. Allow to dry over night.
  1. Cut out the bird with its wheels and head feathers and glue onto the first image aligning it. Cut out the silver wing and eye and glue it to the bird. Glue additional watch parts near the bears and the word Steampunk on the right side of the heart. Allow the glue to dry and fill the bezel with more resin. Allow to dry overnight. Add charms, beads, and chain of choice using jump rings.

 

 

 

Eclectic Charms Kitty Necklace by Debbie Cole

Supplies:SSC1217_DC_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
FRG13C Royal Blue Glass Glitter
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Cardstock by Bazzill Basics®
Americana® Baby Blue, Hauser Light Green, Lamp Black, Raw Sienna, Snow white, and True Ochre Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Matte Medium by DecoArt®
Medium Rectangle Bezel by Art Mechanique
Two Part Resin by ICE Resin
Cosmetic Sponges
Bubble Palette
Paper Palette
Paper Towel
All Purpose Glue
Chain Necklace
Jump Rings
Rhinestones
Beads
Craft Sticks
Disposable Measuring Cups

Instructions:

  1. The stamping and painting will need to be done twice since this necklace is completed with the layered technique. Basecoat the paper with Snow White, this will help keep it white and not allow it to discolor after the resin is poured. Place the cat stamp from the collection onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the mixed media paper. The details should be easily seen and not be too dark. Repeat this process and stamp the cat a second time.
  1. Using a bubble palette, place about a dime size drop of True Ochre and Baby Blue into individual bubble. Create a mixture of three parts water and one part Easy Float. Mix one part paint with three parts water or enough water to make the paint transparent. Completely mix the paint in the bubble palette so there is no solid pigment. Using a #3 round wash in the cat with True Ochre and the background with Baby Blue. Wash in the second cat. Float to shade the second cat with True Ochre, then Raw Sienna. Fill in the iris of the eyes with Hauser Light Green. Allow to dry and coat both sides of the paper with matte medium.
  1. When dry, cut the first cat to fit into the bezel. If you have the die, you can run it through your machine. Manually cut out the cat from second image. Coat these images again with matte medium. Allow o dry and glue the first image to the bottom of the bezel. Allow glue to dry.
  1. Mix Ice Resin according to manufacturer’s instruction and pour it in to fill half of the bezel. Sprinkle a little blue glitter in the blue sections of the image. Allow to harden overnight. Glue the second cat into position. Mix a small amount of Ice resin again. Pour just enough to cover the cat. Allow to dry overnight. glue rhitstones into place and add some more glitter. Mix additional Ice Resin and fill the bezel. Allow to harden. Add charms, beads, and chain of choice using jump rings.

 

Eclectic Charms Mona Lisa Necklace by Kristine Reynolds

Supplies:SSC1217_2_KR_800

From Stampendous:
SSC1217 Eclectic Charms Perfectly Clear™ Stamps
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®
MPW811 Fran’s Mixed Media White Paper
EJS05 Spoonful of Rust
SSH57 Jumbo Perfectly Clear™ Acrylic Handle

Plus:
Copic Markers: E50-E51-E93-E17-B000-B01-G20-G21-E70-E71
Inkssentials Memory Glass and frame
Antique Paper Distress ink by Ranger
Heat tool

Instructions:

  1. Cut a 2″ square panel from white cardstock
  2. Stamp Mona Lisa image and sentiment on the panel with black ink and color with markers
  3. Sponge ink on panel
  4. Sprinkle Spoonful of Rust on the panel and heat from underneath until melted
  5. Add panel to Inkssentials Memory Glass and frame
  6. Add ribbon and chain