Archive for penguin

PenPattern Penguin by Jennifer Dove

PenPattern Penguin by Jennifer DoveSupplies:

From Stampendous:
W137 PenPattern Penguin
DCS5069 Snowflake Die Set

Plus:
Memento™ Tuxedo Black Ink by Tsukineko®
Cardstock by Bazill Basics Paper®
Zip Dry™ Paper Glue by Beacon Adhesives

Instructions:

  1. Shape, layer and adhere cardstock according to your likes.
  2. Create sparkly snowflakes using Stampendous’ snowflake die set.
  3. Stamp the cute PenPattern Penguin, color, and rearrange as you like.

Penguin Snow Candle Box by Debbie Cole

Cling Jumbo Penguin Snow Candle Box by Debbie ColeSupplies:

From Stampendous:
CRS5055 Cling Jumbo Penguin Snow
MG01 Crystal Micro Glitter
SSH57 Jumbo Perfectly Clear Handle

Plus:
Americana Alizarin Crimson, Black Forest Green, Blue Chiffon, Cherry Red, Espresso, Holly Green, Lamp Black, Mistletoe, Traditional Raw Sienna, Turquoise Blue, White Wash, & Whispering Turquoise Acrylic by DecoArt®
Multi-Purpose Sealer by DecoArt®
Easy Float by DecoArt®
Matte Varnish by DuraClear
Paintbrushes
Sponge Wedges
Sanding Disc
Plastic Palette
Paper Palette
Paper Towl
Removable Tape
Cheese Cloth
Wood Candle Box

Instructions:

  1. Prepare the box with sealer, sand, then wipe with cheese cloth. Basecoat the box with Turquoise Blue. Apply multiple coats until smooth and even. Coat background with a coat of matte varnish. This will protect the work you have already done plus allow for easy clean-up for the next step.
  2. Determine placement of the penguins referring to the photo. Lay the penguin template into position and secure with removable tape. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of White Wash out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge to basecoat the entire penguin with the White Wash paint. Repeat until an even coverage is achieved. Remove template and clean. Apply one coat of matte varnish. Using the same sponge, reload with additional White Wash. Now quickly pounce the loaded sponge over the entire lettering stamp and stamp it on the bottom of the box. Repeat to the other three sides of the box. When using paint on stamps it is important that you do not overload the stamp. If you don’t like what you have stamped simply wipe it off with a wet wipe! Since you already have a coat of varnish on the surface, it will clean up easily. Immediately wash the stamps with soap and water. If any has dried use an old tooth brush to clean.
  3. Pour out a puddle of Lamp Black paint. Load a new sponge in the same manner as stated above. Place stamp on large acrylic handle. Quickly pounce the loaded sponge over the entire penguin stamp , align the stamp, and stamp it on the surface. The black on the penguin should look smooth and even. If it is not, apply a another coat of Lamp Black over these areas using a brush.
  4. Using a bubble palette, place about a dime size drop of Cherry Red, Golden Straw, Whispering Turquoise (hat bands), and Holly Green in individual bubbles. Mix one part paint with appx three parts water mixed with Easy Float. Completely mix the paint until it becomes transparent. Using a #4 round brush for small areas and a #10 shader for the green hat, wash in all the colors referring to the photo for placement.
  5. Shade each color with full strength paint using a flat brush varying the size to the area being painted. Apply a second shade to the green areas with Mistletoe, the red areas with Alizarin Crimson, the yellow areas with Traditional Raw Sienna, and the white areas with Whispering Turquoise. The white areas of the penguins are shaded with Blue Chiffon. The black areas are highlighted with floats of White Wash. Dry brush additional highlights to the hats and around the box’s snowflake cut outs with White Wash, using a #1 Cole Dry Brush. Fill dots on green hat with Cherry Red. Using thinned White Wash, pull lines to create fur on the hats bands. Pull lines on top of the striped hat with Holly Green and on top of the green hat with Cherry Red to create the tassels.
  6.  Load a sponge with White Wash and stamp the snowflakes onto the box. Use a stylus to apply dots randomly around the box for additional flakes. Float White Wash below the penguins to create snow. Apply glitter by applying matte varnish in areas where the glitter is desired, then sprinkle with glitter. Use a dry brush to remove any unwanted glitter. Allow to cure for 24 hours. Apply multiple coats of matte varnish to protect the box.

 

I hope you enjoyed this box and that it will make a your holidays a little brighter!

Penguin Snow by Debi Hammons

Supplies: CRS5055_Penguin_Snow_DH_800

From Stampendous:

CRS5055 Jumbo Penguin Snow
EJK08 White Encrusted Jewel Kit

Plus:

VersaFine Onyx Black Ink by Tsukineko
VersaMark Ink by Tsukineko
VersaColor Sky Blue Ink by Tsukineko
Sponge Daubers by Tsukineko
Wildberry Pie Cardstock by Bazzill Basics Paper®
Red, White Cardstock
ZipDry™ Paper Glue by Beacon Adhesives®
Glue Pen by EKSuccess
Colored Pencils

Instructions:

  1. Fold 11” x 4 ¼” Wildberry Pie cardstock in half to form card base.
  2. Stamp Snowflake with VersaMark ink all over the card front and emboss with Crystal embossing powder (from the kit).
  3. Stamp Jumbo Penguins on 4 ¼ x 4” white cardstock.
  4. Color as desired.
  5. Mask Penguins with the template included.
  6. Using a Sponge dauber and the dot template sponge dots and clouds around the penguins.
  7. Trim the sides down to 3 ½” stopping at the penguin flippers.
  8. Cut out the penguin flippers with scissors.
  9. Glue to 3 5/8” x 4 1/8” red cardstock.
  10. Glue to the card front.
  11. Add white Mica (from the kit) to the snow, with a glue pen.

Penguin Snow by Kristine Reynolds

Supplies: D180_CRS5055_kr_800

From Stampendous:

CRS5055 Jumbo Cling Penguin Snow
FRG10C Shaved Ice
TP114 Blue Tinsel Embossing Powder
GX220U Multi Ultra Fine Crystal Glitter
VM001 VersaMark™ Watermark Stamp Pad
SSH57 Perfectly Clear Handle

Plus:

Memento Tuxedo Black Ink by Tsukineko
Blue Ink
White & Dark Pink Cardstock
Pink Patterned Paper
White Ribbon
ZipDry Paper Glue by Beacon Adhesives
Embossing heat tool
Copic Markers R21, R23, R25, B00, B02, B04, YR00, YR02, YR04

Instructions:

  1. Stamp Penguins on white cardstock twice.
  2. Use one a for front panel.
  3. With the second cut around Penguins to create a mask.
  4. Place mask over Penguins on front panel. Stamp Snowflakes with VersaMark Ink.
  5. Carefully remove mask and coat with Blue Tinsel Embossing Powder. Tap off excess and heat to set.
  6. Color Penguins as desired.
  7. Adhere patterned paper to cardfront with glue.
  8. Adhere Penguin panel to cardfront.
  9. Trim with ribbon.
  10. Add glitter and Shaved Ice with glue.
  11. Add ribbon.

Penguin Snow Scrapbook Page by Debi Hammons

Supplies: CRS5055_Penguin Snow Page_800

From Stampendous:

CRS5055 Jumbo Penguin Snow
DP100 Detail White Embossing Powder
VM001 VersaMark™ Watermark Stamp Pad
SSH57 Jumbo Perfectly Clear Handle

Plus:

Memento™ Tuxedo Black Ink by Tsukineko®
White, Red, & Black Cardstock
ZipDry™ Paper Glue by Beacon Adhesives®
Dimensional foam adhesive
Thickers by American Crafts

Instructions:

  1. Stamp Snowflakes all over 12″ x 12″ black cardstock with VersaMark™ Ink.
  2. Coat with White Embossing Powder. Tap off excess and heat to set.
  3. Stamp Penguins on 4 1/2″ X 4″ white panel with black ink.
  4. Color as desired.
  5. Adhere Penguin panel to 4 3/4″ x 4 1/4″ red panel.
  6.  Adhere 9″ x 1 3/4″ white panel to 9″ x 2″ red panel with glue, centered.
  7. Ahere to lower left edge of scrap page.
  8. Apply Thickers for message.
  9. Back photo with red panel and adhere to scrap page with glue.
  10. Adhere Penguin Panel over sentiment panel with dimensional foam adhesive.