Archive for poppy

Frantage Flowers Pop Up Die Poppy Necklace by Debbie Cole

Supplies:DCP1001_SSC1198_SSC1177_DC_800

From Stampendous:
SSC1198 Frantage Flowers Perfectly Clear™ Stamps
SSC1177 Butterfly Charms Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
FRG02 Champagne Crushed Glass Glitter
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Deep Burgundy, Desert Sand, Hauser Light Green, Lamp Black, Medium Flesh, Traditional Burnt Umber Acrylic Paint by DecoArt®
Dazzling Metallics Shimmering Glorious Gold Acrylic Paint by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the two largest oval dies, tape together, and cut eight “frames” to create the bezel using a Big Shot or similar machine. Glue the frames together to create the depth of the bezel. Basecoat with Glorious Gold.
  1. Cut two large backs for the bezels using craft board or heavy mixed media paper. Glue an eye hook or bail to the top of one of the cuts, then glue the two pieces together. Base the back side with Glorious Gold. Do not glue the base to the frame until the first layer of the artwork is completed.
  1. The inside artwork is completed with the layered technique. Cut a piece of media paper using the large die. Base with Desert Sand. Allow to dry and stamp with all stamps using Traditional Burnt Umber. Wash in the butterfly and large flower with Deep Burgundy and the stem with leaves with Hauser Light Green. Cut out the base with the large oval and glue the bezel together. Mix the resin following the manufacturer’s instructions and pour just enough to coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Stamp the flower and butterfly stamps multiple times over the white paper. Place the stamp from the kit and place it onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the white mixed media paper. The details should be easily seen and not be too dark. Wash over the entire flower and butterfly with Medium Flesh, then shade with Deep Burgundy. Cut all images with matte medium to seal.
  1. Glue images to resin and allow to dry. Allow to completely dry. Mix the resin following the manufacturer’s instructions and pour to fill the bezel. Allow to harden overnight. Add charms, beads, and chain of choice using jump rings.

 

Frantage Flowers Poppy Pop Up Die Necklace by Debbie Cole

Supplies:DCP1001_SSC1198_DC_800

From Stampendous:
SSC1198 Frantage Flowers Perfectly Clear™ Stamps
DCP1001 Pop Up Die Set
FRG02C Champagne Crushed Glass Glitter
MPW811 Mixed Media White Paper
SSH38 Small Perfectly Clear™ Acrylic Handle

Plus:
Americana® Deep Burgundy, Desert Sand, Lamp Black, Spicy Mustard Acrylic Paint by DecoArt®
Dazzling Metallics Bronze Acrylic Paint by DecoArt®
Matte Medium by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Watch Parts
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools

Instructions:

  1. Using the two largest rectangle dies, tape together, and cut eight “frames” to create the bezel using a Big Shot or similar machine. Glue the frames together to create the depth of the bezel. Basecoat with Bronze.
  2. Cut two large backs for the bezels using craft board or heavy mixed media paper. Glue an eye hook or bail to the top of one of the cuts, then glue the two piece together. Base the back side with Bronze. Do not glue the base to the frame until the first layer of the artwork is completed.
  3. The inside artwork is completed with the layered technique. Cut a piece of media paper using the large die. Base with Deep Burgundy.
  4. Stamp the large flower stamp multiple times over the whitepaper. Place the stamp from the kit and place it onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp onto the white mixed media paper. The details should be easily seen and not be too dark. Float to shade the flowers that will be on the top layer with Desert Sand Pull lines of Golden Sand + Spicy Mustard(1:1) in the center of the flowers. Cut all flowers with matte medium to seal.
  5. Stamp the base of the die twice with the scroll from the set using Spicy Mustard. Glue to top of base and coat with matte medium. Cut out and glue the first set of flowers on top of the base and trim. Glue the frame into position and allow to completely dry. Mix the resin following the manufacturer’s instructions and pour just enough to coat the image. Sprinkle some glitter into the resin. Allow to harden overnight.
  1. Cut the shaded flowers to the resin and allow to dry. Allow to completely dry. Mix the resin following the manufacturer’s instructions and pour to fill the bezel. Allow to harden overnight. Add charms, beads, and chain of choice using jump rings.

 

Poppy by Janelle Stollfus

Supplies: CRS5048_CRR145 _SSC1159_MG06_MG08_EP020_JS_800

From Stampendous:

CRS5048 Jumbo Cling Rubber Poppy
MG06 Lavender Micro Glitter
MG08 Lime Micro Glitter
EP020 Clear Embossing Powder
VM001 VersaMark™ Watermark Stamp Pad

Plus:

Memento Tuxedo Black Ink by Tsukineko
Copic Markers
White & Kraft Cardstock
Twill Ribbon
Zip Dry Paper Glue by Beacon Adhesives

Instructions:

1. Fold kraft card stock for card base.
2. Stamp Decorative Grate onto card base with Versamark Watermark Ink Pad.
3. Sprinkle Clear embossing powder over card base and shake off excess.
4. Sprinkle Lime Micro Glitter over card base and lightly tap off excess. Heat emboss from back side of paper.
5. Cut three different widths of twill ribbon and make tails on one end.
6. Stamp Happy Day sentiment from Rose Thoughts Perfectly Clear Stamp Set in black ink. Trim and cut tail end on right side.
7. Stamp Jumbo Poppy with black ink. Color with markers.
8. Trim around colored Poppy and position around on card base with cut twill ribbon and sentiment.
9. Glue into place with Beacon glue.