Archive for resin – Page 2

Steampunk Charms Resin Necklace by Debbie Cole

Steampunk Charms Resin Necklace by Debbie ColeSupplies:

From Stampendous:
SSC1179 Steampunk Charms
SSC38 Small Perfectly Clear Acrylic Handle

Plus:
Media Mixage Antique Bronze Medium Rectangle Bezel by Spellbinders
Americana Traditional Raw Sienna & Traditional Burnt Umber Acrylic Paint by DecoArt®
Easy Float by DecoArt®
ICE® Resin
Sponge Wedges
Glue
Bubble Palette
Paper Towel
Cogs & Gears
Antique Bronze Necklace Chain
Antique Bronze Jump Rings
Antique Bronze Lobster Claw Closure
Rhinestones
Craftsticks
Disposable Measuring Cups
Detail Scissors

Instructions:

  1. Place the text stamp onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Traditional Burnt Umber out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp on the light brown card stock. Using the same sponge, reload with the Traditional Burnt Umber and stamp the remaining images onto the off white card stock.
  2. Cut the stamped text to fit into the bezel. If you have the die, you can run it through your machine. Seal the paper with all purpose glue, allow to dry, and repeat step. Mix Ice Resin according to manufacturer’s instruction and pour small amount into the bezel. It should cover the entire bottom, but only half the depth. Allow to harden.
  3. Using a bubble palette, place about a dime size drop of Traditional Raw into an individual bubble. Mix one part paint with approximately three parts water mixed with Easy Float. Completely mix the paint until it becomes transparent. Using #8 shader wash over the remaining images. Cut out when dry. Seal in the same manner as the background. Glue the balloons,and small watch gears into place in the bezel and the man onto a cog. Mix Ice Resin and pour to fill bezel. Pour a small amount over the man on the cog. Allow to set for two hours. Place three rhinestones onto the upper right hand corner of the bezel. They will stick to the resin. Allow to harden over night.Glue man on cog into lower left hand corner. Add charms, cogs, and chain of choice using jump rings.

Stack Art Angel Wings Clay Tag by Debbie Cole

Stack Art Angel Wings Clay Tag by Debbie ColeSupplies:

From Stampendous:
SAK01 Stack Art Kraftboard Angel Wings
SAS01 Stack Art Stamps Angel Wings

Plus:
Americana Lamp Black, True Blue, & Ultra Deep Blue Acrylic Paint by DecoArt®
Dazzling Metallics Glorious Gold Acrylic Paint by DecoArt®
DuraClear Matte Varnish by DecoArt®
Paintbrushes
Bronze Polymer Clay
ICE® Resin
Oval Bezel
Blue Rhinestones
Sponge Wedges
X-Acto® Knife
1″ Square Shape Cutter
Cogs & Watch Parts
Cardstock
Glue

Instructions:

  1. Knead the clay so that it is soft and workable. Roll in a ball and roll the clay out using a rolling pin or acrylic roller to 1/4 inch in depth. Apply Damask stamp onto an acrylic handle. Spray the  stamp with a light mist of water and press firmly into the clay. Lift the stamp off the clay. Remove the large stack art kraftboard.  Use the negative space as a template to cut out the clay shape with an X-Acto Knife. Cut the wings in the same manner. Roll a small ball of clay and place into oval bezel. Bake all shapes in a toaster oven according to manufacturer’s instructions. Allow to cool.
  2. Paint the background with True Blue, wiping off the paint to reveal the clay underneath. Add Ultra Blue Deep only in the deep crevices of the clay using a #3 round brush. Dry brush highlights to background and wings and wash over the face with Glorious Gold.  Dampen cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Quickly pounce the loaded sponge over the face stamp. Stamp it onto the clay in oval bezel. Glue all elements together adding blue crystals.
  3. Mix Ice Resin according to manufacturer’s instructions. Brush ATC as a varnish with a disposable brush. Allow to harden overnight.

 

Steampunk Gears Resin Necklace by Debbie Cole

Steampunk Gears Resin Necklace by Debbie ColeSupplies:

From Stampendous:
SSC028 Butterflies Perfectly Clear Stamps
SSC1143 Steampunk Gears Perfectly Clear Stamps
SSH38 Small Perfectly Clear Acrylic Handle

Plus:
Americana Traditional Burnt Umber, Traditional Raw Sienna, Lamp Black, Deep Burgundy, & Victorian Blue Acrylic Paint by DecoArt®
Easy Float by DecoArt®
Paintbrushes
White Cardstock
Bubble Palette
Paper Towerls
Glue
Watch Gears
Winged Key Hole Charm
Necklace Chain
Craft Sticks
Disposable Measuring Cups
Detail Scissors
Small Watch Bezel
ICE Resin

Instructions:

  1. Place the watch stamp onto an acrylic handle. Dampen a cosmetic sponge and remove as much water as possible. Pour a puddle of Traditional Burnt Umber out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Pounce the sponge onto the stamp and stamp on the card stock. Using the new sponge, load with Lamp Black and stamp the butterfly onto card stock.
  2. Cut the stamped watch to fit into the bezel. Cut out the butterfly.
  3. Using a bubble palette, place about a dime size drop of Traditional Raw Sienna, Deep Burgundy, and Victorian Blue into individual bubbles. Mix one part paint with appx three parts water mixed with Easy Float. Completely mix the paint until it becomes transparent. Using #8 shader wash over the watch face. Float to shade with full strength paint. Wash the butterfly with the red and blue using a #3 round brush. Cut out all images when dry. Seal them with all purpose glue, allow to dry, and repeat step. Glue the watch image to bottom of bezel. Place watch gears around the inside of the watch. Mix Ice Resin according to manufacturer’s instruction and pour small amount into the bezel. It should cover the entire bezel up to the rim. Allow to set up about two hours.
  4. Fold the winds of butterfly up. Set it into the sticky resin so that it looks like it is resting on the watch. Allow to harden over night.
  5. Add chains and watch to winged keyhole. Attach to chain using jump rings to form necklace.

Square Illusion Bezel Ring by Stephanie Lee

Supplies: W121_FRG12C_FRG16C_FRG15C_SL_800

From Stampendous:
CRW121 Square Illusion
FRG16C Fuschia glass glitter
FRG12C Green glass glitter
FRG 15C Oceanic glass glitter

Plus:
Cardstock
ICE Resin
Bezel ring
Adhesive

Instructions:

  1. Stamp image and trim to size.
  2. Adhere inside bezel, sprinkle with glitter and add resin.

Umbrella Bezel by Stephanie Lee

Supplies: CRS5065_FRG16C_SL_800

From Stampendous:
CRS5065 Asian Umbrella

FRG16C Fuschia glass glitter

Plus:
Copic Markers (B21, B24, B26, Y32, Y35, Y38, YG03, YG63, YG67)
Cardstock
ICE Resin
Bezel
May Arts twine
Adhesive

Instructions:

  1. Stamp and color image and trim to size.
  2. Adhere inside bezel, sprinkle with glitter and add resin.
  3. Add twine to form necklace.