Archive for stack art

Royal Heart Pop Up Die Necklace by Debbie Cole


From Stampendous:
SAS03 Stack Art Stamps Royal Heart
DCP1001 Pop Up Die Set
EP226 Champagne Embossing Powder
DP104 Detail Copper Metallic Embossing Powder
MPW811 Mixed Media White Paper
VM001 VersaMark Watermark Ink by Tsukineko®
SSH38 Small Perfectly Clear™ Acrylic Handle

Dazzling Metallics Champagne Gold & Worn Penny Acrylic Paint by DecoArt®
ICE Resin® Two Part Resin
Cosmetic Sponge Wedges
All Purpose Glue
Chain Necklace
Chain Closure
Eye Pins & Jump Rings
Craft Sticks
Disposable Measuring Cups
Jewelry Tools


  1. Using the second to largest rectangle dies cut eight pieces using a Big Shot or similar machine. Align the large pieces, glue two sets of four together. Glue a bail or eye hook on the top of one set, then glue the two sets together.
  1. Draw a line about 2/3 up on the top of the pendant. Paint the upper portion with Champagne Gold. Paint the bottom portion with Worn Penny. Coat with matte varnish.
  1. Cover the bottom portion of the pendant with paper. Place the scroll stamp from the kit onto an acrylic handle. Load the stamp with Versamark and stamp onto the top portion. Sprinkle with Copper embossing powder, remove excess powder, and heat. Cover the top portion of the pendant with paper then repeat the steps using Champagne embossing powder. Glue rhinestone chain to fit across the pendant where the two colors meet.
  1. Mix the resin following the manufacturer’s instructions and coat the pendant. Allow to harden overnight. Add charms, beads, and chain of choice using jump rings.


Tomb Elements by Wendy Price

Tomb Elements by Wendy PriceSupplies:

From Stampendous:
W134 Tomb Elements
H309 Halloween Wish
SSC1207 Halloween Diamonds Perfectly Clear™ Stamps
SAS01 Stack Art Stamps Angel Wings
EP111 Midnight Black Opaque Embossing Powder
SSH34 Medium Perfectly Clear™ Acrylic Handle
VM001 VersaMark Watermark Ink by Tsukineko®
MEM01 Memento™ Tuxedo Black Ink by Tsukineko®

Delicata Silvery Shimmer Ink by Tsukineko®
Cardstock by Bazill Basics Paper®
Zip Dry™ Paper Glue by Beacon Adhesives
Tim Holtz® Dusty Concord & Black Soot Distress Ink by Ranger®


  1. Stamp Tomb Elements in Memento Ink. Cut out skeleton part of the image. 
  2. Stamp wings from Stack Art Angel Wings in Versmark and emboss with Stampendous Black Embossing Powder. Adhere to back of skeleton. 
  3. Stamp Halloween Wish sentiment. Color panel with Dusty Concord Distress Ink. 
  4. Adhere skeleton image to the sentiment panel. 
  5. Ink white cardstock with Silvery Shimmer Delicata, Dusty Concord, Black Soot Distress Ink. Splatter with water. Stamp spider web from Halloween Diamonds on background.
  6. Adhere sentiment panel and skeleton to the card front. 

Stack Art Royal Heart by Cyndi Bundy

Supplies: SAS03_SAK03_EKM05_CB_800

From Stampendous:

SAK03 Royal Heart Stack Art Kraftboard Kit
SAS03 Royal Heart Stack Art Stamp Set
EKM05 Survival Stack Art Elements Kit


Acrylic Paint – two greens, pink, ochre
Memento™ Tuxedo Black ink by Tsukineko
Makeup Sponges
Ribbon by May Arts
Scissors, scrap of cardstock


  1. Paint large tag shape green and allow to dry.
  2. Attach adhesive to shield tag shape. Cover with Copper Micro Glitter and rub glitter into place to cover thoroughly.
  3. Paint heart pink and allow to dry. Stamp with face stamp and black ink when dry.
  4. Attach adhesive to crown shape and cover with mica fragments pressing into place. Fragments can be made smaller by crushing with finger to fill all the space.
  5. Add ochre dots with pencil eraser to sides of large tag.
  6. Paint a scrap of cardstock large enough to fill opening in shield shape olive green. When dry, apply ochre paint to stamp with makeup sponge and stamp on cardstock. Allow to dry.
  7. Cut out words from enclosed greeting sheet with scissors.
  8. Layer all layers as shown and attach ribbon to back with glue.

Stack Art Regal Bird by Lea Kimmel

Supplies: SAK02_LK_800

From Stampendous:
SAK02 Stack Art Kraftboard Regal Bird
EJK01 Red Encrusted Jewel Kit
EJK09 Gold Encrusted Jewel Kit
VM001 VersaMark™ Ink Pad by Tsukineko®

Strong Adhesive (like Zip Dry™ or Glue Dots)
Hole Punch
Heat Tool


  1. Ink bird body and wing with VersaMark™ Ink.
  2. Coat with Aged Scarlet Embossing Enamel and Red Tinsel Embossing Powder. Tap off excess and heat to set.
  3. Emboss Crown with Gold Embossing Powder.
  4. Piece bird together with adhesive.
  5. Remove medium sized backing from sticky sheet, align window Kraftboard and press into sticky paper. Peel away.
  6. Press bird into sticky paper then apply Gold Halo Glitter to remaining sticky paper on Kraftboard. Burnish in glitter and tap off excess.
  7. Cut sentiment out and glue to back of the window Kraftboard showing through.
  8. Remove sticky paper backing from Largest shape. Align largest Kraftboard on top and press in. Peel away so Kraftboard now has the sticky on it.
  9. Press sentiment Kraftboard to front of large Kraftboard. Apply Red Glitter and Red Fragments to remaining stickiness. Tap off excess.
  10. Pierce two small holes and top and place wire through for hanging.

Stack Art Royal Heart Steampunk Shoes by Debbie Cole

Stack Art Royal Heart Steampunk Shoes by Debbie ColeSupplies:

From Stampendous:
SAS03 Stack Art Stamps Royal Heart
SAK01 Stack Art Kraftboard Angel Wings
SSC1195 Steampunk Shoes Perfectly Clear Stamps
SSH34 Medium Perfectly Clear Acrylic Handle

Americana Lamp Black, Traditional Burnt Umber, & True Blue Acrylic Paint by DecoArt®
Dazzling Metallic Bronze, Glorious Gold, Shimmering Silver, & Worn Penny Acrylic Paint by DecoArt®
DuraClear Matte Varnish by DecoArt®
ICE® Resin
Bronze Polymer Clay
Sponge Wedges
Clay Blade or X-Acto® Knife
1″ Square Shape Cutter
Cogs & Watch Parts


  1. Knead the clay so that it is soft and workable. Roll in a ball and roll the clay out using a rolling pin or acrylic roller to 1/4 inch in depth. Apply Text stamp onto an acrylic handle. Spray the Text stamp with a light mist of water and press firmly into the clay. Lift the stamp off the clay. Remove the large stack art kraftboard.  Use the negative space as a template to cut out the clay shape with an X-Acto Knife. Cut out a 1 inch square in the upper right hand corner of the shape using a shape cutter. Remove the square and roll to 1/8 inch thickness. Cut with shape cutter and place back into the square hole. Roll another small piece of clay to 1/8 inch thickness, lightly press steampunk shoe  and cog stamps into the clay and cut out. place the clay clogs onto the clay ATC. Roll a small ball of clay and place on cogs. Slit an “x” with knife to create screw cap. Bake all shapes in a toaster oven according to manufacturer’s instructions.
  2. Place shoe stamp onto a small acrylic handle. Dampen cosmetic sponge and remove as much water as possible. Pour a puddle of Lamp Black out on the palette paper. Pounce the sponge into the paint and then on a clean area of the palette. When you look at the bottom of the sponge it should be covered by paint but you should still be able to see the texture of the sponge. Quickly pounce the loaded sponge over the entire shoe stamp. Stamp it onto card stock paper. Repeat. Stamp the text “Click your heals” in the same manner. When using paint on stamps it is important that you do not overload the image. Immediately wash the stamp with soap and water. If any has dried use an old tooth brush to clean. The sponge can also be washed and reused.
  3. Use a small paint brush to paint the blue areas of the shoe and Click of the text with a wash of True Blue. The metal areas of the shoe are washed with Glorious Gold and Shimmering Silver. Paint the second shoe metal sections in the same manner. Cut out. Glue the shoe onto the shoe shaped clay. Add small watch parts and glue additional shoe metal parts.
  4. Thin Traditional Burnt Umber and wash over the clay ATC. Dry brush the metallic colors randomly over the ATC. Cut out the text to fit the square. Coat with all purpose glue on both sides of paper. Place into hole. Glue cogs, watch parts and shoe onto the ATC. Mix Ice Resin according to manufacturer’s instructions. Pour into the hole and brush over remaining ATC as a varnish. Allow to harden overnight.